B4C comes with tranny cooler is that enough

**Z28boy2000** · 11-01-2009, 06:13 PM

im all set to order my tranny and converter for my winter project. my question is my B4C came from the factory with a tranny cooler, will it be enough with the new tranny and stall or should i just get a new one?

**Y2KPewterSS** · 11-01-2009, 06:14 PM

You need a new one. The factory one is not sufficient enough for the extra heat a convertor adds. You can find one online, most vendors will have one, or go to Oreilleys or any local auto part store and buy one. I got mine at OReilleys, ran about $50.

**Z28boy2000** · 11-01-2009, 06:20 PM

yeah i figured id need one, just wanted to double check before i add more money onto the "winter project" bill

**Z28boy2000** · 11-01-2009, 06:22 PM

im thinking about this one from New Era

http://www.neweraperformanceparts.co...&PKV=bm70264|0

**Y2KPewterSS** · 11-01-2009, 06:22 PM

Originally Posted by Z28boy2000

im thinking about this one from New Era

http://www.neweraperformanceparts.co...&PKV=bm70264|0

Most people have had positive feedback on that one, solid cooler

**allbaugh_04** · 11-01-2009, 09:53 PM

Looks like a decent cooler and has all the stuff you need. Doesn't show the size of it though. Should do the trick.

I got the B&M 70272. It has 28000 GVW, a bit more than the one you listed but I'm not even sure what the number means cooling wise. It has 20500 BTU as well. 11x8". $100 bucks now, but it was only 89 when I bought it, but I figured it was large, had higher numbers, it might be better and I didn't want to take chances with a 800 dollar converter and a $1200 fresh build on the 4L60E

**Z28boy2000** · 11-03-2009, 11:47 AM

Originally Posted by allbaugh_04

Looks like a decent cooler and has all the stuff you need. Doesn't show the size of it though. Should do the trick.

I got the B&M 70272. It has 28000 GVW, a bit more than the one you listed but I'm not even sure what the number means cooling wise. It has 20500 BTU as well. 11x8". $100 bucks now, but it was only 89 when I bought it, but I figured it was large, had higher numbers, it might be better and I didn't want to take chances with a 800 dollar converter and a $1200 fresh build on the 4L60E

your right, i called performabuilt and they told me this one ^ will defiantly cool me right down

thanks for the input