B&M Tranny Cooler

**LangeZ28** · 05-23-2006, 02:27 AM

Which B&M Transmission Cooler is the best for F-Bodies? One with a fan or not? Which P/N? Where is the best place to mount? No zip tie nounts!

**12secSS** · 05-31-2006, 12:27 PM

Most everyone uses the 70264. It is a complete universal install kit with hoses and push thru-radiator retainers. You don't need the one with a fan option, but you can. Be advised those and the race coolers do not have any mounting hardware or universal install kits. You will need 1/2 NPT adapter to your preferred lines. Hope this helps ... I know, a bit late.

**2001NBMZ28** · 05-31-2006, 12:59 PM

I installed the B&M 24K, mounted it dope style (horizontally under the right front, no zip ties) no problems.

**LangeZ28** · 05-31-2006, 09:03 PM

Thanks for the feedback. I will probably go with the one that can handle 24K.

**86TransAm383** · 06-23-2006, 12:34 PM

its not what one its where you put it 100% if you put it in front of the rad. and like 50% if you put it behinde the rad.

**mighty username** · 06-27-2006, 01:22 PM

I have the B&M mounted in front of the radiator on the lower right corner. i also have a tci deep pan. That along with some moderation in driving is enough for my setup.