Results 1 to 5 of 5
Thread: A4 ws6
-
07-13-2014, 09:23 PM #1
A4 ws6
2000 ws6 shifting funny, just started tonight never done this before. I hoped in and started to drive off and the rpm's were hanging going to about 3000 before it would shift itself. The car still goes into every gear and lock-up, not slipping either that I can tell, if you get on it the down shift is like always grabs and goes its the normal driving up through the gears that's different. When I go from park to D it hits in there hard jumps the car even when on the break but not as bad when going into R. The line pressure is tuned in the car but have never had a problem.
2001 Camaro SS, LM 1, BMR LCA, relocation brackets, BMR springs, adj panhard bar, smooth below, lid, sub-frame connectors weld on, strut brace
2000 WS6, ls6 intake, sub-frame connectors, slp maf, slp cat delete with slp y-pipe, electric cutout, strut brace, smooth below, slp lid, bmr LCA and RLB
-
07-14-2014, 02:15 AM #2
Can you scan for codes?
-
07-14-2014, 02:46 AM #3
I might be able to, but if it was a code wouldn't I have a light on the dash?
-
07-14-2014, 03:06 AM #4
The scanner can also show "pending codes" that have not yet set off the SES light.
-
07-14-2014, 09:08 AM #5
- Join Date
- Oct 2008
- Location
- Coral Springs, Fl
- Posts
- 5,774
Sunset Orange Metalic- 2001 Camaro SS
Check to see that the maf sensor is plugged in
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks