Results 1 to 10 of 10
Thread: 00' ss A4 tranny strength?
-
03-07-2006, 10:25 AM #1waldo31031Guest
00' ss A4 tranny strength?
Yea i have a 00' ss a4. I am about to put polished dart heads, cam, lifters, 85mm intake and throttle body. It already has longtubes and full borla. So im guessin it will have at least 450hp. The car has 100k miles on it. How long will the stock tranny hold up?
-
03-07-2006, 11:04 AM #2
i'm assuming the tranny's stock... no way to tell how long it will last, but i can tell you it will go, the trannys break under stock power. just keep some funds saved up for when it does, and go with a th350 or th400 and be done iwth it
-
03-07-2006, 11:05 AM #3
i give it 1,000 maybe 2,000 miles mine was shot after 3,000 miles with a cam, lifters, intake
-
03-07-2006, 11:58 AM #4
- Join Date
- Sep 2005
- Location
- Bakersfield/Long Beach Ca
- Age
- 37
- Posts
- 886
YJ- 04 GTO M6
You might want to save some money for a rebuild. 4L60E trannys last about 100k. Mine made it to 90k before it blew out on me. And 2k later its better than ever. I just have minor bolt ons. But I know the previous owner drove it to hell and back.
-
03-09-2006, 07:57 AM #5waldo31031Guest
o yea im also puttin 100-150 shot on it. Is it possible that it will go out on the dyno?
-
03-09-2006, 08:05 AM #6
prolly not, your also going to want to get a stall when you do rebuild it, cause it will be a bitch to drive with your cam, and it wants to fight through red lights
-
03-09-2006, 11:45 AM #7waldo31031Guest
aight thanks
-
03-17-2006, 05:08 AM #8waldo31031Guest
i just installed new heads cam lifters intake everything went in smooth . then we started the engine sounds good except a high pitch squeel sounds asa if coming from harmonic balancer but took front cover off cant find nothing rubbing the squeal is louder at idle than 2 to 3 thousand rpm 's anyone know what has happen????
-
03-21-2006, 09:22 AM #9
- Join Date
- Mar 2006
- Location
- Near St. Louis
- Age
- 38
- Posts
- 31
Red- 1998 T/A
450hp will likely destroy a turbo 350 unless built correctly(full manual valve body,extra clutches), which can be pricey. The th-400 would definitely be the safest route making that much power; especially with the nitrous. The 400 robs more power but can be built much stronger.
-
03-24-2006, 04:22 AM #10
- Join Date
- Feb 2006
- Location
- Orlando FL
- Age
- 42
- Posts
- 52
Barbados Blue- 2004 Pontiac GTO
I ran over 30 bottles of nos in my ta at 150 shot and never broke a tranny but for gm every tranny breaks at 100k cause no one every changes the tranny fluid every 30k like it should be infacted if you have a auto matice and you treat it right it will take it. but breaking the stock rear end thats easy.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Block strength LS1 vs. LS6?
By nmcgrawj in forum General HelpReplies: 4Last Post: 08-02-2007, 04:04 AM -
VFN strength?
By daveb91 in forum Appearance SectionReplies: 3Last Post: 07-03-2007, 10:49 AM -
7.5 10 bolt strength
By stocker67 in forum Automatic TransmissionReplies: 5Last Post: 02-09-2006, 06:36 AM -
tranny strength
By cjg454ss in forum Automatic TransmissionReplies: 6Last Post: 01-27-2006, 08:01 PM -
T-56 Strength
By xpauliber in forum DrivetrainReplies: 18Last Post: 12-01-2005, 10:14 PM
Members who have read this thread: 0
There are no members to list at the moment.
Bookmarks