whats my hp/tq

[iceman504]

car has
4:10 gears
LS6 intake
hooker catback
lower rear control arms
Ram air setup
motosports airlid
stall converter
Car is a automatic 2001 z28 with 68k miles

[BlackLT1Z28]

Strap it on a dyno and find out. That's the only way to have numbers, but the only numbers that matter in this game are 60' and 1/4 ET's and traps.

But to try and answer your intial question, a guesstimation would be around ~350 at the crank, give or take a few. The only mods that would directly affect engine performance would be the LS6 manifold, catback and intake.

[iceman504]

ok another question then, what would be my 60'

[BlackLT1Z28]

That one's easy to find out...take it to the track.
It all depends on how high your stall is and what type of tires you have. Slicks will yield the best traction, but most people only invest in slicks if they go to the track A LOT. Since its an auto, there's not much technique to launching it.

[iceman504]

ok there is mickey thompson et street radials on the rear already but i need to get rid of them and get some good street peformance tires to replace them. Also would the rear tires off the back of a 2001 v6 camaro work fine on a 01 z28?

[SSmoky01]

Only thing is, those tires off that v6 are probably 16" and you should have 17" rims...

[SSwt00SS]

car has
4:10 gears
LS6 intake
hooker catback
lower rear control arms
Ram air setup
motosports airlid
stall converter
Car is a automatic 2001 z28 with 68k miles

320-330rwhp, same w/rwtq...

[BlackLT1Z28]

ok there is mickey thompson et street radials on the rear already but i need to get rid of them and get some good street peformance tires to replace them. Also would the rear tires off the back of a 2001 v6 camaro work fine on a 01 z28?

You'll probably want something wider than what comes on the v6 models.

[iceman504]

ok thanks

[nhraformula]

320-330rwhp, same w/rwtq...

id say closer to 320 if that because the stall and gear take away numbers