Tested all major spark plug wires. My results...

[adrenalinejunkie]

hey don't know if this has been covered already my apologees if it has.

has anyone used pulstar plugs? i have heard claims and read articles on both sides and its kinda sketchy. i mean the claims are great but before i spend 25 bucks a plug i wanna see if anyone has used them?

[RAMAIR_LS1]

O.K... Price being no object, what is truly the hot set-up for wires and plugs?

And have any of you tried the MSD coils, and if so are they worth the cost?

[sjd73ss]

I just ordered a set from summit they are they taylor 10.4 mm race wires Taylor Cable 79203 - Taylor 409 Pro Race Spiro-Wound Core Spark Plug Wires and they rate them at 50 ohms resistance. They cost 64.99 plus a few for shipping.

[SSDEUCE]

I know this is really old but just got some msd wires did my own check stockers were 320ohms brand new msds 25-32ohms not any power in that but i'll see if its worth a few extra miles to the tank

[Kaotic_ws6]

I just ordered a set from summit they are they taylor 10.4 mm race wires Taylor Cable 79203 - Taylor 409 Pro Race Spiro-Wound Core Spark Plug Wires and they rate them at 50 ohms resistance. They cost 64.99 plus a few for shipping.

yea about a month back i got the taylor thundervolt 10.4mm wires, there awesome, hope you enjoy yours too

[tatertot91]

O.K... Price being no object, what is truly the hot set-up for wires and plugs?

And have any of you tried the MSD coils, and if so are they worth the cost?

Not worth the cost
If you want coils do some research on truck coils
BTW got my MSDs for 50 shipped off amazon

[lsgunner28]

I have the 10.4 taylors and love them.
Anyone have the E3 plugs, are they worth it? horsepower tv said they were with 16hp and 7ft/lbs gained.

[JDHedman]

thanks. good info

[2000dreambird]

[smslyguy]

The granitelli wires give you an extra 10 rwhp over stock. I was going to get them but after I seen it i had already ordered my msd wires

Is this a manufactory's claim? Do you have dnyo numbers of this? Before and after? A lot of manufactory's claim to add "up to" h.p. which from my experiece the "up to" h.p. can never be acheived.

[j nix]

What does everyone think about changing stock plugs to AC Delco's Iridium plugs?

[tatertot91]

What does everyone think about changing stock plugs to AC Delco's Iridium plugs?

Those are good
if you want cheap go NGK tr55s those are highly recommended as well

[j nix]

Are you saying the AC Delcos are cheap or the NGK's are cheap. I don't want cheap, I want the best I can find.

[pajeff02]

Are you saying the AC Delcos are cheap or the NGK's are cheap. I don't want cheap, I want the best I can find.

The NGK's are a less costly plug. The Delco Iridiums are a great plug, but about double the price, if not more.

[tatertot91]

Thanks jeff
exactly what i meant

[j nix]

I wasn't sure, but thats what I thought. I think they are $6.95 at summit racing. I thought that was pretty good. They have a high heat rating. I am wondering if they will cause a problem running to cold.

[pajeff02]

I wasn't sure, but thats what I thought. I think they are $6.95 at summit racing. I thought that was pretty good. They have a high heat rating. I am wondering if they will cause a problem running to cold.

Looks like the correct part number for the Iridiums is 41-110. Not sure what you mean by "high heat rating". No one has ever posted about an Iridium plug related issue that I am aware of.

[j nix]

I read some where that if the plug has too high or too low of a heat rating it could cause issues. Just putting it out there, maybe someone knew something. Are MSD wires the way to go for low Ohms?

[tatertot91]

I read some where that if the plug has too high or too low of a heat rating it could cause issues. Just putting it out there, maybe someone knew something. Are MSD wires the way to go for low Ohms?

MSDs are probably the best for your buck
i would recommend them

[j nix]

Are running with stock Delphi wires? What do you have? Have you heard of an MSD that works with coil packs?