TB/Manifold combo

**SSzoe** · 01-11-2006, 04:08 PM

Hey guys I was just wondering what kind of intake manifold and throttle body everyone was running...I was thinking an LSX and a 90mm Fast TB but I wonder if a 90mm is too much.... Just wondering what everyone else was runnin

**NE98LS1** · 01-12-2006, 03:25 PM

i was super close to buying that same set up you mentioned, but decided to do my exhaust end first, but i think that is an excellent idea, there are intake manifolds on ebay made by FAST LSX that has the throttle body connected to the manifold for like 700 bucks. might be worth lookin at!

**SSzoe** · 01-12-2006, 03:31 PM

Awesome I will definatly look into that...700 not bad at all

***Ed Blown Vert*** · 01-12-2006, 03:34 PM

Stock TB and LS6 intake.

**NE98LS1** · 01-12-2006, 03:51 PM

^^i've heard those ls6 manifolds are pretty top not i've heard too! but if you are interested in going with the one i suggested, here is a picture, just look up "ls1 intake" on ebay and it'll bring it up for you. all ready to go for a zex direct port set up if you ever chose to also!

seriousblack · 01-12-2006, 04:14 PM

do you know where you can get an intake smooth bellows hose that will fit the F.A.S.T LSX 90mm Intake & 90 mm Throttle body combo?

seriousblack · 01-12-2006, 04:22 PM

Check out HOT ROD MAG'S 01/06 ISSUE -EXCELLENT BLUEPRINT FOR 530 HP BUILD UP -ALL MOTOR! PG 104 TITLED "LS1 COOKBOOK" WILL ANSWER YOUR QUESTION RE; 90mm intake/TB COMBO

**NE98LS1** · 01-12-2006, 04:59 PM

you should be able to make your own smooth air below from piping you could get at any home depot like department. i know someone posted info on it in a thread not too long ago...