Replacing water pump

**12secws6** · 10-04-2008, 10:56 AM

sooo how do i remove the pulley off the pump so i can swap it out..???

**98formy** · 10-04-2008, 01:19 PM

I used a screwdriver propped in between the bolts to keep the pulley from turning and used the other hand to loosen the bolts one at a time. You need to be careful because the screwdriver can slip off the bolts and beat up your hands. Loosen one up, rotate the pulley a quarter turn, and repeat until all loose. The same way to tighten them back up.

**12secws6** · 10-04-2008, 02:02 PM

Originally Posted by 98formy

I used a screwdriver propped in between the bolts to keep the pulley from turning and used the other hand to loosen the bolts one at a time. You need to be careful because the screwdriver can slip off the bolts and beat up your hands. Loosen one up, rotate the pulley a quarter turn, and repeat until all loose. The same way to tighten them back up.

thanks alot gotta get it done this wknd