Header Installation Write up?

[NiteRiderWs6]

is there anyone that knows a website or has a link to anyone who has written up a header intall guide?

[davered00ss]

Not real hard.

1. Put car on jackstands
2. disconnect coil packs
3. remove plugs & wires
4. remove dip stick tube.
5. drop cat-back ( don't need to remove, just lower)
6. remove Y-pipe.
7. Loosen header bolts & drop manifolds

Driver side header goes in facing front and rotate in
Passenger side slides right up.
Tighten header bolts. ( use washers if reusing stock bolts) (ARP header studs are hard to get the headers in place if you install them first.)
Attatch Y-pipe. Yoiu may need to cut 1" +/- to fit the cat-back back on.
Install cat-back & adjust.
re-install dip stick tube in oil pan
lower car and install plugs,wires & coil packs.

Check out ls1howto.com or installuniversity.com Not sure if they have anything or not.

Post in your local forum. someone who has done it may be willing to help you. I have done several for people I met that way.

hope this helps.