Edelbrock LT question

**biga0206** · 05-31-2007, 07:09 PM

Hey, I have some Edelbrock LTs and I was wondering if they will fit on a 98 TA with out any problems. The question of EGR and AIR fittings keeps coming up. Any input would be great. Sorry if this is a dumb question as well i searched it and couldn't find any answers. Thanks in advance.

**shady milkman** · 05-31-2007, 07:32 PM

if the headers are for the ls1 then they will. you can eliminate the egr and air system with some blocking plates and tune it out.

**biga0206** · 05-31-2007, 07:49 PM

and if you choose not to block them out and tune them out will the check eng light go off?

**0rion** · 05-31-2007, 11:18 PM

Originally Posted by biga0206

and if you choose not to block them out and tune them out will the check eng light go off?

no
Does edelbrock not make headers with emmsion provisions on them? I would contact Edelbrock and see. I'm betting they do but I'm not familiar with their headers.

**yellowv** · 06-02-2007, 09:38 AM

Edelbrock makes headers both with and without provisions for EGR and AIR. Do the ones you have have the provisions?

**biga0206** · 06-02-2007, 09:44 PM

Originally Posted by yellowv

Edelbrock makes headers both with and without provisions for EGR and AIR. Do the ones you have have the provisions?

sorry if this is a dumb question but is there a way to tell. i got them used and im not sure.

**yellowv** · 06-03-2007, 01:30 AM

Originally Posted by biga0206

sorry if this is a dumb question but is there a way to tell. i got them used and im not sure.

If they have provisions they will have a little flange coming off of the header tubes. One on each side for the AIR system and if they are 98-99 headers they will have 2 on the passenger side header. One for the AIR and one for EGR. IIRC the Edelbrocks with the welded collectors all have provisions while the slip fit collector models do not.