Results 1 to 12 of 12
  1. #1
    Junior Member LS1 Hawk's Avatar
    Join Date
    Sep 2007
    Location
    SF Bay Area
    Posts
    48

    Triple Black
    02 M6 Vert Hawk #199

    Which Bolt-On first?

    If you could do it all over again, which bolt on would you add first, second, third etc?

    I want to keep it California Smog legal, and don't want to change the internals. I'm changing all the fluids, what can I bolt on to this beast to pump up the HP even more, and get the biggest bang for my bucks?

    Already has the SLP airbox with the Firehawk package.

    And then a Dyno tune, of course.

  2. #2
    Senior Member Zboner's Avatar
    Join Date
    Aug 2005
    Location
    cincinnati/northern ky
    Age
    38
    Posts
    9,035

    Black
    99 SS

    i would do headers, and a nice NX kit and go with a 125 shot

  3. #3
    Senior Member JonB's Avatar
    Join Date
    Sep 2006
    Location
    Florida
    Age
    40
    Posts
    1,455

    Black
    2005 GTO

    To stay smog legal. I would stick with lid, ported tb, underdrive pulley, catback cated y-pipe. Then I would look for some smog legal shorty headers in the for sale section for cheap, I would not buy them new not nearly worth the price but for $100-$200 used there not a terrible deal.
    05 PBM GTO
    Cold Air Inductions CAI,
    Relocated IAT with omega,
    Slp Predator tune,
    Flowmaster axle back with H pipe,
    Custom tuned TCM.
    BC Racing coil overs


    Sold 01 z28

  4. #4
    Member Empatho's Avatar
    Join Date
    Jan 2007
    Location
    San Diego
    Posts
    361

    Pewter
    02 Z28

    I wouldnt waste money or shorty's, dont the 01-02 manifolds flow about the same?
    2002 Z28 Auto (3.23 gears)
    Mods
    Lid, UD pulley, Shift Kit, 160 Thermo, Y-pipe, Panhard, TB bypass, Bellow, K&N, Strut Brace, Flowmaster, weight reduction.

  5. #5
    M6 King Hot Black Trans-Am's Avatar
    Join Date
    Mar 2006
    Location
    WI
    Posts
    5,085
    Blog Entries
    1

    09 EclipseGT 75 Chevy 4x4
    2001 Trans-Am 13 F-XT

    How about running stock Vette manifolds? I read they are good for 10HP over the F-body manifolds, but I don't know how well they fit. They look a little longer so you'd have to have them connected to the cats, but I think they would be the way to go seeing you can get them cheap. Here's link to some on ebay.

    http://cgi.ebay.com/ebaymotors/ls1-e...spagenameZWDVW

  6. #6
    Nitrous Tuner LS2Tuner's Avatar
    Join Date
    Aug 2006
    Location
    WestCoast AZ-CALI
    Posts
    4,704

    Silver
    05 Goat SMASHED

    First a high flow muffler,second buy a wet nitrous kit,third get a good tune.
    NO other mods will be anywhere near that bang for your buck improvement.
    Next buy a real pair of drad radials cause you'll need them.
    That will make you have a mid to low 12 second car....
    Don't be afraid of the bottle!!! Be afraid of your tune!!!

  7. #7
    Member Empatho's Avatar
    Join Date
    Jan 2007
    Location
    San Diego
    Posts
    361

    Pewter
    02 Z28

    the 00+ fbods got a better exhaust manifold, just get an Off raod Y-pipe without cats and when its time for the smog test suap in your stock one its not that hard to do, free mods, ported throtle body, underdrive pulley, catback, 160 degree thermostat, and tune. Dont forget about your suspension, get rear lower control arms, panhard, torque arm, and sub frame conectors this will help get more traction

  8. #8
    Nitrous Tuner LS2Tuner's Avatar
    Join Date
    Aug 2006
    Location
    WestCoast AZ-CALI
    Posts
    4,704

    Silver
    05 Goat SMASHED

    Quote Originally Posted by Empatho View Post
    the 00+ fbods got a better exhaust manifold, just get an Off raod Y-pipe without cats and when its time for the smog test suap in your stock one its not that hard to do, free mods, ported throtle body, underdrive pulley, catback, 160 degree thermostat, and tune. Dont forget about your suspension, get rear lower control arms, panhard, torque arm, and sub frame conectors this will help get more traction
    Lca's and tq. arm and panhard won't be needed unless you put big bottle!
    The sfc will help. But your biggest sus. mod that will help you hook is put a pair of V-6 junkyard springs in. It will help more than the $500-600 you'll spend on lca's and arm. Springs shouldn't be more than $40-50.

    The 160 thermostat we have discused in much detail......Don't waste your time! Get a real tuner on the car for the fan settings and a 185 will be fine or even stock for that matter.

  9. #9
    Member Z28LS1's Avatar
    Join Date
    May 2006
    Location
    New Jersey
    Posts
    160

    black
    1999 Camaro Z28 M6

    If you want to be really cheap.. Extend your slp ram air by building another box that connects to the slp box out of thick sheet metal. Curve the edges too. You can catch more air that way. It was pretty simple to do.

  10. #10
    Senior Member Bottesini's Avatar
    Join Date
    Sep 2007
    Location
    Denton, Texas soon Lafayette, Louisiana
    Posts
    2,956

    Blue
    2002 Z28 Camaro M6

    For me I am going to do the SFCs first then some long tubes and dual exhaust. I am choosing to do the SFCs first so that the exhaust guys can route things with the SFC in place. Then of course a nice tune should be needed

  11. #11
    Member Empatho's Avatar
    Join Date
    Jan 2007
    Location
    San Diego
    Posts
    361

    Pewter
    02 Z28

    Quote Originally Posted by LS2Tuner View Post
    Lca's and tq. arm and panhard won't be needed unless you put big bottle!
    The sfc will help. But your biggest sus. mod that will help you hook is put a pair of V-6 junkyard springs in. It will help more than the $500-600 you'll spend on lca's and arm. Springs shouldn't be more than $40-50.

    The 160 thermostat we have discused in much detail......Don't waste your time! Get a real tuner on the car for the fan settings and a 185 will be fine or even stock for that matter.
    the Lca's and T/A will help him because he has an M6 and its better to get them out of the way for future mods, and if you are going to buy a 185 might aswell get a 160 they dont do anything without a tune but he did say he was getting a tune

  12. #12
    Nitrous Tuner LS2Tuner's Avatar
    Join Date
    Aug 2006
    Location
    WestCoast AZ-CALI
    Posts
    4,704

    Silver
    05 Goat SMASHED

    Quote Originally Posted by Empatho View Post
    the Lca's and T/A will help him because he has an M6 and its better to get them out of the way for future mods, and if you are going to buy a 185 might aswell get a 160 they dont do anything without a tune but he did say he was getting a tune
    Ok what ever you say I won't waste anymore time here.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Bolt-In Rearend Buyers Guide - Bolt-In Rearends -
    By Ed Blown Vert in forum Almost Anything Goes
    Replies: 0
    Last Post: 08-25-2010, 02:40 AM
  2. Bolt-In Rearend Buyers Guide - Bolt-In Rearends -
    By Ed Blown Vert in forum Almost Anything Goes
    Replies: 0
    Last Post: 08-24-2010, 02:40 PM
  3. Bolt On Parts - Dyno Proven Bolt-ons - Tech
    By Ed Blown Vert in forum Camaro / SS
    Replies: 7
    Last Post: 10-01-2007, 04:37 PM
  4. Center bolt to Perimeter bolt Heads, Coil Mounting help
    By juiced99ws6 in forum Internal Engine
    Replies: 7
    Last Post: 03-30-2007, 11:38 PM
  5. wtb - 12 bolt - have cash & rebuilt 10 bolt for partial trade
    By wesTXwitesnake05 in forum Parts For Sale / Trade
    Replies: 0
    Last Post: 07-09-2006, 10:17 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •