Results 1 to 2 of 2
-
10-30-2007, 12:08 AM #1
tranny wiring identification...help?
Okay its a long story but my question is which color of wires gose to each sensor heres a pic to wich ones im talking about.
1.I believe is the sensor that makes you shift from 1st-4th
2.I dont know what it does but its the one at the top of the T56 tranny
3.I cant seem to find it in the pic but its around that area or dont know if theirs one their but I think theirs one because I need to wire 6 wires that where cut.
well hope some of you guys can help me out like if you remove your exhaust anytime soon or are under their sometime in the week just check out wich colors go to wich sensor.Thanx for your help.
-
10-30-2007, 11:31 AM #2
- Join Date
- Apr 2007
- Location
- boostville
- Posts
- 24
primer- 93 GEO *limited edition*
#2 I believe is the reverse lockout solenoid.
I'm pretty sure they are all sized so that you can only put each plug in the right sensor. I never marked my wires the 5 times I pulled the trans but was able to get them all in the correct locations. If your wiring harness is still in the car just put everything back in about 85% of the way so you just have enough room to reach your hand up there and you should be able to plug them all in.
Hope that helps, good luck.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
AK identification guide
By Modulistic in forum Gun's & AmmoReplies: 0Last Post: 01-12-2010, 10:18 PM -
4.8 and 5.3 identification
By midnightcamaro in forum GM TrucksReplies: 1Last Post: 08-19-2008, 10:32 PM -
How do i wire two seperate front tweeters with no factory wiring or wiring from deck?
By Mike Hawk in forum Stereo and ElectronicsReplies: 1Last Post: 11-16-2007, 09:41 AM -
Need head identification please
By NightRiderZ in forum Internal EngineReplies: 5Last Post: 07-15-2007, 07:18 PM -
LS1 Identification
By 9fingergt in forum General HelpReplies: 2Last Post: 10-21-2005, 09:48 AM
Bookmarks