Results 1 to 5 of 5
-
02-11-2007, 05:45 PM #1
- Join Date
- Sep 2005
- Location
- Hellam, PA.
- Age
- 48
- Posts
- 25
White- 1993 Mustang Cpe
15in draglites still not working for me :( w/pics
Well I finally unbolted the chrome Z06 wheels and tried on my weld draglite 16x9s (5.5BS)with 28x11.5x16s rear and weld draglite 15x3.5s (1.75BS) on. No spacers, no mods, no grinding involved for the rear. I have top and side pics of the rear and shows i have 1in between the front of the rear wheel well with the 28s.
The fronts are completely different story. I have a 2000 FRC M6. Well one fellow member let me know he has a i think a 98 Cpe with welds 15x3.5s on the front. He used 2.5in long studs and a 15/16 spacer. Says the fit no rubbing and stick out slightly past the fender. Well I went with a 1.25in spacer that bolts to my existing studs and has 5 studs of its own. I knew it would be to far out but I had to see how much clearance. Well I'm so FN pissed at this point. The rim hits the outside of the caliper and wont move. Plus it sticks out like a MOFO!!! I took top pics. It sticks out about 2-2.5inches from the edge of the fender. I could honestly deal with it, if it were like .5 in out but not this far. Anyways I finally borrowed a camera put the wheels on and took pics. I'm very happy with the rear. Just not sure what to do about the front. Any input would be greatly appreciated.
Bruce
http://s170.photobucket.com/albums/u275/FartpipeZ06/
-
03-07-2007, 06:07 PM #2
the rear look real nice and i think thats the set up that i want to do for my car. nice pics.
and rear tires never touch the body even fully suspended
-
10-20-2007, 06:56 PM #3
- Join Date
- Sep 2005
- Location
- california
- Posts
- 33
weld draglite 16x9s (5.5BS)
Where did you find weld draglite 16x9s (5.5BS). The Weld site doesn't list
16".
-
10-20-2007, 08:10 PM #4
- Join Date
- Sep 2005
- Location
- Hellam, PA.
- Age
- 48
- Posts
- 25
White- 1993 Mustang Cpe
-
10-21-2007, 06:57 PM #5
- Join Date
- Sep 2005
- Location
- california
- Posts
- 33
weld draglite 16x9s (5.5BS)
Thanks. I wish they made 16s also. this way I wouldn't have to grind the calipers.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
A few pics of my working progress..
By foxman92 in forum Member's RidesReplies: 15Last Post: 08-15-2009, 03:24 PM -
trade for draglites
By 2Fasstforyou in forum Parts Wanted / TradeReplies: 0Last Post: 11-01-2007, 02:45 PM -
looking for some draglites
By silverz98 in forum Parts Wanted / TradeReplies: 0Last Post: 03-14-2007, 07:57 PM -
draglites and hoosiers f/s
By cam02ss in forum Parts For Sale / TradeReplies: 3Last Post: 05-18-2006, 05:09 AM -
fs: draglites 15x10
By bobwhite in forum Parts For Sale / TradeReplies: 0Last Post: 02-16-2006, 03:38 PM
Bookmarks