where do i add the small air filter new lid(2000-2002)?

[greatwhiteZ28]

where does that little filter go when i take off the stock lid for new one.

[2001NBMZ28]

Put it into the end of the hose that went to the stock air box, then zip tie it out of the way. Don't kink the hose or restrict it's airflow - will throw an SES light.

[greatwhiteZ28]

the end closest to air box (left)??

[NvyBluMtlc02WS6]

there is a hose that attaches to the lid on the right hand side. pull that hose off the lid and stick the little filter in there. just zip tie it out of the way when you are finished.

[greatwhiteZ28]

one more thing, there wasnt one that came stock to replace just adding one more, right?

[2001NBMZ28]

No stock one - the added filter just fits into the end of the hose so when the AIR system operates and it sucks in air on cold starts for a couple minutes when the air pump operates, gets filtered air.

[jmhvenom]

Recommend getting it tune out, then just yank the whole thing out of there.

[greatwhiteZ28]

soo one more time should it look like this.

[greatwhiteZ28]

tuned out what do u mean?

[jmhvenom]

You can have the AIR turned off in the PCM so you can just take it out.

[greatwhiteZ28]

is that a Kand N what kind of filter is that, where to buy

[jmhvenom]

autozone for 10 dollars, look in the ricer section, i prolly still have it if you want it... its called an oil breather filter ithink.

[GatorSS]

Just get rid of the whole AIR system and be done with it.

[jmhvenom]

that what I did eventually, but you have to turn it off in the PCM

[greatwhiteZ28]

that ricer filter ,will do the job just like the k and n for $20 ?

[jmhvenom]

Ya, you really could just take that how out completely from both sides of the AIR, and just let it think its doing its job.