used engine restore, now oil pressure ???

[346DubS6]

I changed my oil this morning and poured a bottle of some engine flush. Drained the oil, put 2 quarts in and dumped a whole bottle of that Restore Engine Restore additive and poured the remaining oil. Start her up and checked everything, I noticed that the oil pressure is reading at 20-25psi at idle. While cruising it would read 40-45psi, when i let off it goes back down to 20 and at WOT it would go up to 55-65psi. I changed the oil again after driving around town hoping it would come back up but no luck, it still reads the same.I used Penzoil Platinum 10w30 and a Purolator PureOne oil filter.

[FORD RECOVERY EXPERT]

mods???

[JoshieDoom]

maybe you had a bunch of gunk clogging up your oil passages and it cleaned it out.. thus lower OP?

[FORD RECOVERY EXPERT]

very possible... also could be due to diff brand filter, diff oil weight??

[youngrichone]

I was wondering about that product myself I searched the site about it and found this link hope it helps I was just reading about it today too

http://www.ls1.com/forums/showthread...engine+restore

[JoshieDoom]

K&N Filters give me good OP and they are frikin easy to change.. dont even have to jack the car up to change it..

[bamaz28]

change filter