Thread Locker on Fuel Rails

**ls1camino** · 01-04-2009, 04:55 PM

I'm putting together some aftermarket fuel rails and was wondering if this product would be enough for the fittings.

http://www.performanceonline.com/sto...cat=654&page=1

**Mr. Luos** · 01-04-2009, 04:57 PM

I used the teflon stuff.

You want thread sealer, not locker.

**Hi-Po** · 01-04-2009, 06:24 PM

**SteveC** · 01-07-2009, 02:50 AM

If the adaption of the fuel rails use a "conical" end AN fitting, it will seal itself when the fuel line is installed, if the fuel rail fitting end is not conical, I would use thread tape that is made for oil and fuel.

SteveC