Results 1 to 4 of 4
Thread: temp gauge
-
03-17-2011, 08:27 AM #1
temp gauge
temp gauge is going up and down normal when cold then all of a sudden my check gauges turns on. then i see the needle of the temp gauge goes all the way to the red zone for a little bit. then it goes back to 210.....
-
03-17-2011, 08:41 AM #2
It sounds like it could be a sticking thermostat. Or a bad sending unit. Sounds more like the thermostat to me though.
Lt's,SFC,3,600 Fuddle stall,Spohn Adj. tunnel mount torque arm, BMR LCA,Ls6 intake,Air lid,Under drive pulley,S60 rear,Frost tune and a few more things I cant remember.
-
03-17-2011, 11:51 AM #3
If it is in your '02, the temp gauage is really more of a temp estimator. Mine reads 205 degrees all the time, irrespective of what the actual engine temp is on my scanner. Best bet is to hook up a scanner to check your temps and if they are in fact wavering you should immediately service your cooling system.
-
03-17-2011, 05:02 PM #4
- Join Date
- Aug 2010
- Location
- Savannah, Ga
- Posts
- 23
Blue- 2001 TA WS6, 1995 BMW M3
I had the same issue and replaced the sending unit. Fixed it right up. Good luck.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: Oem temp gauge
By cruzincamaro in forum General HelpReplies: 2Last Post: 01-27-2012, 09:00 PM -
Want to trade Tranny Temp gauge for Oil pressure gauge.
By jrbonds in forum Parts Wanted / TradeReplies: 7Last Post: 07-29-2011, 08:47 AM -
temp gauge
By Darkrider02 in forum General HelpReplies: 6Last Post: 09-23-2010, 08:06 AM -
Hooking up Oil pressure gauge,and Temp Gauge
By BirdFlewLS1 in forum General HelpReplies: 5Last Post: 01-15-2008, 06:15 AM
Bookmarks