Results 1 to 10 of 10
-
04-23-2008, 08:56 AM #1
So there's oil on my TB and intake man.
I took off my TB cuz it's getting ported and polished soon. I noticed there was some oil on the backsize of it and a little on the front of my intake manifold. Should i just replace the PCV valve? is there any other maintainence I should do?
-
04-23-2008, 12:35 PM #2
- Join Date
- Feb 2008
- Location
- NEW JERSEY
- Posts
- 814
PEWTER- 2001 TRANS AM WS6
Install A Catch Can Between The Pcv Valve And The Intake
-
04-23-2008, 02:24 PM #3
are those expensive?
-
04-23-2008, 03:24 PM #4
not really, if you get the updated pcv valve it will prolly help you a lil on it. some build up of carbon is normal tho. was it excessive?
2002 Z28 M6, Suncoast Creations ram air, port/polish TB w/ bypass and bumpstop, heater hose mod, stainless steel long tubes, ORY w/ dual cutouts, Magnaflow, BMR SFC, UMI Torque Arm, LS7 clutch w/ drill mod, Pro 5.0 w/ Lous short stick, MSD wires, 4.10s, good maintenancehttp://www.fquick.com/blue02z
-
04-23-2008, 04:04 PM #5
no it wasn't excessive at all. at least on the TB, i didn't really check the intake manifold well. i'll probably just swap out the pcv
-
04-24-2008, 08:00 PM #6
Just get a catch can from www.catchcans.com
-
04-24-2008, 11:14 PM #7
- Join Date
- Mar 2007
- Location
- Pittsburgh, PA / State College, PA
- Age
- 42
- Posts
- 103
Silver- 2000 Trans Am WS6
Like everyone else in here is sayin, get a catch can, it will stop that....I put one on my ride, it def works
2000 Silver Ws6 - Holly Powershot, MTI clear lid, MBA descreened 85mm maf ends, SLP bellow, SLP 160° T-stat, EGR delete, TB bypass, Elite Engineering PCV oil catch can, Sealed Ram Air, Diablo Predator, UMI SFC's, UMI Torque Arm, Borla adj cat-back
-
04-25-2008, 02:17 PM #8
- Join Date
- Dec 2006
- Location
- Standish,Maine
- Age
- 57
- Posts
- 560
Artic White- 00 SS Vert.
You can get a small catch can from JEG'S.com for $40.
-
04-25-2008, 07:07 PM #9
u can make ur own with an water/air separator from home depot and some fuel lines for about $20
-
04-26-2008, 03:38 AM #10
I'm gonna need one as well, it's what most people do to solve that problem.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BBK SSI Intake, vs Holley Intake, vs LS6 intake, vs PP 96mm
By Lunatikgixxer in forum External EngineReplies: 26Last Post: 02-28-2017, 10:39 AM -
Question: HOW TO: Swap stock intake with LS6 intake
By thechad125 in forum General HelpReplies: 18Last Post: 02-26-2013, 03:17 AM -
LS6 intake manifold and 227 Intake runners
By IT_SS in forum Internal EngineReplies: 4Last Post: 07-07-2009, 02:11 PM -
Single Plane Intake VS Stock PP Intake
By xzaero0 in forum Forced InductionReplies: 1Last Post: 11-27-2007, 07:00 PM -
Difference in Stock Ram Air intake and other aftermarket intake
By WS6-cobra killer in forum Firebird / WS6Replies: 5Last Post: 01-15-2007, 06:47 AM
Bookmarks