Results 1 to 20 of 21
-
06-01-2010, 06:44 PM #1
So i need another one of these....
Ive been looking for another one, my stock one does not fit anymore since i put my x pipe in. Is there a place, or someone on here, who makes and sells one that will fit the car or any advice anyone can give me. Or should i just beat the black sheet metal one with a hammer till it fits?
-
06-01-2010, 06:55 PM #2
subscribed...
Suggestion: If you are particularly irritated by another member's posting habits and are constantly fighting the urge to flame them, you can click on that person's profile, and select "Add to ignore list." This will make that person's posts invisible to you.
-
06-02-2010, 05:17 PM #3
- Join Date
- Apr 2008
- Location
- Madison, WI
- Posts
- 7,006
1999 Formula WS6 M6-sold- 2001 Silverado Z71
What do you need???
-
06-02-2010, 05:29 PM #4
im trying to figure out what he need also,
-
06-02-2010, 06:14 PM #5
-
06-02-2010, 06:22 PM #6
I think he is talking about the flat metal piece that ties the bottom together.
I have mine removed. You can remove it no problem.
thanks,
Mark
-
06-02-2010, 06:58 PM #7
- Join Date
- Apr 2008
- Location
- Madison, WI
- Posts
- 7,006
1999 Formula WS6 M6-sold- 2001 Silverado Z71
but he has a tunnel mount torque arm crossmember there, doesn't he?? No need for that stock tunnel brace anymore.
-
06-02-2010, 07:59 PM #8
- Join Date
- Mar 2010
- Location
- St Pete, FL
- Posts
- 1,429
Bat mobile black- 2000 Trans am WS6 M6
what kind of x pipe is that? its nice as hell
-
06-02-2010, 08:07 PM #9
I need the arm thats going across holding the exhaust up, thats someone elses car to show the piece i need, i have a custom set up and my old one doesnt work or at least i havent been able to get it to fit up under there.
Sorry i didnt get to this sooner.
See how mines missing said brace back there where the pipes come together.Last edited by 95camaroZNC; 06-02-2010 at 08:37 PM.
-
06-03-2010, 11:06 AM #10
I need one too. I was gonna cut and bend and reweld the stock one but I've been lazy, I don't have one at all right now.
-
06-03-2010, 05:19 PM #11
- Join Date
- Jan 2009
- Location
- North Jersey
- Posts
- 11,496
Phantom Black Metallic- 2004 GTO M6
You running true duals? Either leave it off, or have a brace custom made to clear the X-pipe.
-
06-03-2010, 05:44 PM #12
- Join Date
- Apr 2008
- Location
- Madison, WI
- Posts
- 7,006
1999 Formula WS6 M6-sold- 2001 Silverado Z71
If you use that brace to hold the exhaust up, then you'll have one heck of rattle under there.
-
06-03-2010, 07:02 PM #13
Well right now its rattling under my feet, i thought that would solve it by stiffening it up, is hanging it on the hanger on the passangerside any better?
-
06-03-2010, 07:18 PM #14
- Join Date
- Jan 2009
- Location
- North Jersey
- Posts
- 11,496
Phantom Black Metallic- 2004 GTO M6
Depends on the diameter of the pipe and the clearance needed from the ground. Try using the pass side hanger and see if it helps.
-
06-03-2010, 07:58 PM #15
-
06-03-2010, 08:00 PM #16
- Join Date
- Jan 2009
- Location
- North Jersey
- Posts
- 11,496
Phantom Black Metallic- 2004 GTO M6
I doubt you will have any contact issues using the hanger.
-
06-03-2010, 08:27 PM #17
Oh and this possibly?93-02 Spohn Tubular Tunnel Brace
Last edited by Cutlass; 06-05-2010 at 06:33 AM. Reason: Removed nonsponsor direct link
-
06-03-2010, 08:30 PM #18
- Join Date
- Jan 2009
- Location
- North Jersey
- Posts
- 11,496
Phantom Black Metallic- 2004 GTO M6
I dunno about removing the torque arm. Sounds like a bad move to me.
-
06-03-2010, 08:32 PM #19
Well its the brace for the back not really the torque arm.
-
06-03-2010, 08:35 PM #20
- Join Date
- Jan 2009
- Location
- North Jersey
- Posts
- 11,496
Phantom Black Metallic- 2004 GTO M6
Ah. I see. I thought you planned on removing the tq arm. I never heard of that tho.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks