SLP Lid + Smooth Bellow

**TheKitchenSink** · 04-13-2006, 02:48 PM

I just installed these 2 things on my car, was kinda a pain to get everything to fit into place since the bellow doesnt bend like the last one. I cant get the clips to stay closed on the lid, the passenger side clip always comes undone and the drivers side stays on. Anyone know why this is happening?

**2001NBMZ28** · 04-13-2006, 03:23 PM

Leave everything installed, just loosen the clamps on the bellows. Push the lid back into the tabs as far as it will go, make sure the front of of lid (between the clamps) is inside the lower lip of the airbox. Retighten bellows clamps. I had the same issue years ago with my whisper lid, once the new lid "forms" to the lower airbox it'll be fine. www.installuniversity.com

**rbob93** · 04-13-2006, 03:41 PM

We had a thread about this with pics not long ago too.

**ZeeVert** · 04-13-2006, 07:09 PM

I had the same problem. It'll fit. If you still have trouble, take the bellows and filter off, then just play with the lid. All of the sudden you'll see it.