redline?

[simsridnbigrims]

hey guys, i just wanted to know what is the redline for a stock LS1?

[2001NBMZ28]

If I'm not mistaken stock rev limiter is set at 6200.

[shady milkman]

red starts at 6k and ends at around 7k...rev limiter is set to 6200..or is it 6500 ... and i'm pretty sure at stock she will completely redline max at 6800ish....

[Tyler_LS1]

red starts at 6k and ends at around 7k...rev limiter is set to 6200..or is it 6500 ... and i'm pretty sure at stock she will completely redline max at 6800ish....

X2 thats about as right as it gets

[juiced99ws6]

red starts at 6k and ends at around 7k...rev limiter is set to 6200..or is it 6500 ... and i'm pretty sure at stock she will completely redline max at 6800ish....

umm.. i set my rev limiter to 6800 and floated a valve and backfired my nitrous. rev limiter is set at 6200 for a reason. I had mine at 6400 forever and it held up pretty well but the stock valve train wont hold much over that. If you got some double coiled springs and new retainers and chrome moly pushrods it would rev much higher...

[bills98ta]

The valve springs are the weak link... Upgrade them, and you will rev higher, safer !!! Mine is up to 7800 !!! ( HP Tuner )

[juiced99ws6]

The valve springs are the weak link... Upgrade them, and you will rev higher, safer !!! Mine is up to 7800 !!! ( HP Tuner )

but most ls1s dont make there power up top anyways soooo... What do you want a higher redline for anyways. Not insulting anyone just curious

[bills98ta]

The cam I'm running is rated 2200 - 7200 rpm. I go through the finish line at 7200 in 3'rd 1/4 mile. Love screaming that LS1 !!!

[bills98ta]

I've bounced off the rev limiter while spraying at 7800 already... That hurts the feelings a little...( while figuring out the shift programming )

[shady milkman]

umm.. i set my rev limiter to 6800 and floated a valve and backfired my nitrous. rev limiter is set at 6200 for a reason. I had mine at 6400 forever and it held up pretty well but the stock valve train wont hold much over that. If you got some double coiled springs and new retainers and chrome moly pushrods it would rev much higher...

i know that juice..i didnt say to change it..i just said stock what it is..so it is 6200 i thought so

[INMY01TA]

The valve springs are the weak link... Upgrade them, and you will rev higher, safer !!! Mine is up to 7800 !!! ( HP Tuner )

I hope you do not have a stock bottom end.

[bills98ta]

Actually, yes, and it's never been touched...That's why I'm in search of a stroker or short block ! Don't know if I will get another season out of this one !!!

[WARP211]

Dude The Rev Limtier Pops At 6200rpm Stock!!!!!!!!!!!!!!!

[SSpdDmon]

Actually, yes, and it's never been touched...That's why I'm in search of a stroker or short block ! Don't know if I will get another season out of this one !!!

You're spinning 7800 rpms on the stock bottom end, rod bolts and all?!?!?!? If so, what the hell are you smoking and....puff...puff...give!

[shady milkman]

Dude The Rev Limtier Pops At 6200rpm Stock!!!!!!!!!!!!!!!

he wasnt asking rev limiter..redline is diff then limiter

[juiced99ws6]

I've bounced off the rev limiter while spraying at 7800 already... That hurts the feelings a little...( while figuring out the shift programming )

so what exactly are your mods then... seems to be pretty extreme. also what kinda times are you running that you need to pull your 3rd gear out to 7800 rpms?

[WARP211]

he wasnt asking rev limiter..redline is diff then limiter

my bad dog..

[bills98ta]

I have my limit set at 7800, but I ussally go through the traps at 7200... I was have shift programing issues, causing over revs and still hitting the limiter... Bummer when your spraying...Lucky for me that the limiter kills fuel, not spark...
The top end is ported & flowed very well, wein intake, 80mm BBK, comp cams, 1.8 rockers, holley 32lb injecters, 4600 locker stall, moser 12bollt w/ spool, every rear suspension mod plus the anti roll bar. It pulls 1.36 60foots 10.79 @ 124 mph

[bills98ta]

Hey Juiced, just curious, what NOS system are you using ? I'm using a 150 dry & bumping my WOT for more fuel. ( HPTUNERS )

[bills98ta]

You're spinning 7800 rpms on the stock bottom end, rod bolts and all?!?!?!? If so, what the hell are you smoking and....puff...puff...give!

As far as what I'm smoking, Marlboro Reds !!! I might have killed a couple brain cells earlier in life, but I think they all grew back !!! LOL