Results 1 to 5 of 5
Thread: Rearend clunk/thud...
-
02-04-2009, 08:31 AM #1
- Join Date
- Aug 2006
- Location
- Baton Rouge, La.
- Posts
- 1,068
QuickSilverMetallic- 2005 GTO M6
Rearend clunk/thud...
Doesnt do it all the time. Sometimes a hard bump or a soft one and it will do it. Sounds as if someone is smacking the bottom of the car with a rubber mallet. Just put in BMR LCA's. Any ideas its diving me batshit crazy.
-
02-04-2009, 12:04 PM #2
- Join Date
- Feb 2006
- Location
- Orange County, NY
- Age
- 48
- Posts
- 2,693
always dirty- 2013 Ram 2014 Caddy ATS
Check the tranny mount first. Then I would check the torque arm mount attached to the tranny.
-
02-04-2009, 12:34 PM #3
-
02-04-2009, 03:29 PM #4
Tighten the LCA front bushings. They are naturally loose on the bolts, but are held from rattling by the bolts pinching them in place. You cannot tell if it is loose without disconnecting it from the axle mounting point. The bushings do not have to be in position before tightening like front control arm bushings. I had this for months -it drove me crazy. All better now.
-
02-04-2009, 06:32 PM #5
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help with Thud Sound
By 99WS6MAN in forum General HelpReplies: 7Last Post: 10-27-2010, 05:42 PM -
Thud Thud Thud Thud/ Where is this noise?
By Hi-Po in forum General HelpReplies: 27Last Post: 04-29-2009, 02:54 AM -
This clunk is making my brain clunk....
By silversho89 in forum DrivetrainReplies: 5Last Post: 04-22-2009, 03:51 AM -
thud shifting from 1st to second
By tonyjnjz in forum DrivetrainReplies: 15Last Post: 08-11-2006, 01:34 PM
Bookmarks