Rear O2's

**My00Z28** · 03-11-2011, 05:45 PM

what do people do with their rear O2's after they get them deleted and run and ORY pipe?

**irod346** · 03-11-2011, 05:58 PM

you get o2 sensor simulators i saw them on afterthought auto

**My00Z28** · 03-11-2011, 06:01 PM

Originally Posted by irod346

you get o2 sensor simulators i saw them on afterthought auto

i mean after u get them tuned out!!!

**Spikito** · 03-11-2011, 06:09 PM

Mine are just zip tied to the trans

**Knight** · 03-11-2011, 06:09 PM

Keep them in a drawer, in case the front ones need replaced. Or throw them out.

**My00Z28** · 03-11-2011, 06:10 PM

Originally Posted by Spikito

Mine are just zip tied to the trans

are they connected still?

Originally Posted by Knight

Keep them in a drawer, in case the front ones need replaced. Or throw them out.

did u seal up the connections?

**Knight** · 03-11-2011, 06:11 PM

With an ory, you shouldn't have any holes to fill. The wiring harnesses usually just get zip tied out of the way.

**00z28bubba** · 03-11-2011, 06:33 PM

i left mine plugged into the y pipe but disconnected them from the harnass and zip tied them to look like they are still ran normally.

**Spikito** · 03-11-2011, 09:14 PM

Originally Posted by My00Z28

are they connected still?

did u seal up the connections?

yeah they are

**Cutlass** · 03-12-2011, 04:11 AM

Originally Posted by Knight

With an ory, you shouldn't have any holes to fill. The wiring harnesses usually just get zip tied out of the way.

My Kooks ORY has rear O2 bungs for some reason, so I screwed in the sensors and plugged the connectors together.

**Knight** · 03-12-2011, 04:18 AM

Originally Posted by Cutlass

My Kooks ORY has rear O2 bungs for some reason, so I screwed in the sensors and plugged the connectors together.

Maybe the bungs are for wideband sensors?

I should clarify - most ORYs will not have a second set of holes. If they do, you can either remove the O2s, plug the holes, and tie the harneses up, or leave the entire setup in place. Either will work.

**Spikito** · 03-12-2011, 07:15 AM

my catted Y came with out bungs....weird right?

**Lunatikgixxer** · 03-12-2011, 10:05 AM

Just unplug them and ziptie them up with a few zip ties and you should be good to go.. Make sure they arent up against anything hot either so they dont get burnt.