Results 1 to 2 of 2
Thread: RaceTronix wiring ?
-
05-09-2006, 06:55 PM #1
- Join Date
- Sep 2005
- Location
- S.C.
- Age
- 55
- Posts
- 46
Silver- 1998 Pontiac TransAm
RaceTronix wiring ?
I bought the kit awhile back , I have the instuctions for the pump ,and did'nt get the instructions for the wire harness kit from the alt to the pump. I was wondering if anyone had them and could e -mail them to me ?
Thanks
quicksilver9t8@aol.com
-
05-09-2006, 10:37 PM #2
It's very simple. Just put the wire on the nut on the back of the alternator or use the auxillary power by the fuse box then zip tie it to the fuel line under the heat shields and what not to the back of the car. Then plug the connectors in ( they basically T between the stock connectors) and mount your ground lug and relay under the bolt that holds the brake line bracket in place above the drivers side wheel. Grind the surface a little so you're on good metal and load it up with dialectric grease before putting the lug on there. That's pretty much it.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Racetronix 96 lb Injectors
By cam02ss in forum Parts For Sale / TradeReplies: 0Last Post: 11-14-2014, 03:02 AM -
FYI Racetronix
By shadowsnkx in forum General HelpReplies: 3Last Post: 11-29-2008, 07:36 AM -
How do i wire two seperate front tweeters with no factory wiring or wiring from deck?
By Mike Hawk in forum Stereo and ElectronicsReplies: 1Last Post: 11-16-2007, 09:41 AM -
For Sale: Racetronix Plug & Play Fuel Pump with Wiring Harness
By Ed Blown Vert in forum Western MembersReplies: 10Last Post: 05-21-2007, 01:13 PM
Bookmarks