Results 1 to 3 of 3
Thread: PVC line drivers side
-
06-23-2012, 05:32 PM #1
PVC line drivers side
Hey guys I am in the middle of pulling out all of my old PVC lines to replace them with fuel line. I can't seem to reach the line where it plugs into the drivers side valve cover. There are AIR lines, a plastic canister thingy and a metal bracket blocking it. Are there any tips to removing it? Remove the AIR hoses?
-
06-24-2012, 03:56 PM #2
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,759
Navy Blue Metallic- 98 T/A w/ mods, 00 FBVert
I was able to just reach in and grab it and pull. Should not be that hard of an issue. Just remember to plug it.
One more advisory - be careful moving and pulling the hoses back there. The OPSU is on that side and over the many heat cycles they become brittle. If you all of a sudden lose oil pressure you need to check that first.
-
06-24-2012, 04:59 PM #3
agree with scott. If by any chance the L shape rubber piece is broke or breaks in the process you can use a L shaped spark plug boot.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help: Drivers side is way lower than passenger side......
By 98TransAmWs-6 in forum Suspension and HandlingReplies: 23Last Post: 10-10-2012, 10:21 AM -
Looking for drivers side t top 98 t0 02 trans am
By Durango in forum Parts Wanted / TradeReplies: 5Last Post: 09-22-2011, 11:41 AM -
Camaro 1" lower on drivers side than Pass side
By hix5000 in forum General HelpReplies: 10Last Post: 07-03-2009, 05:16 AM -
drivers side t=top ???
By 402 Guru in forum General HelpReplies: 2Last Post: 02-16-2008, 05:47 PM -
T-Top for drivers side ASAP!
By mikeaford in forum Parts Wanted / TradeReplies: 2Last Post: 10-29-2006, 10:31 AM
Bookmarks