Results 1 to 7 of 7
  1. #1
    GOAT6SPD
    Guest

    Programing Keyless Entry

    Does anyone know how to program a New Keyless Entry Remote Contol for my 02 WS6. I went by the dealer and they wanted 87 bucks. He told me it would take an hour. Thanks for the help.

  2. #2
    Blown, Stroked, & Sprayed

    Ed Blown Vert's Avatar
    Join Date
    Aug 1999
    Location
    Arizona
    Posts
    51,364

    Black
    383 Procharged & N20 Vert

    I wonder if it is the same on a F-Body?

  3. #3
    GOAT6SPD
    Guest
    I am sure it is.

  4. #4
    Blown, Stroked, & Sprayed

    Ed Blown Vert's Avatar
    Join Date
    Aug 1999
    Location
    Arizona
    Posts
    51,364

    Black
    383 Procharged & N20 Vert

    Matching Transmitter(s) To Your Vehicle
    Each remote keyless entry transmitter is coded to prevent another transmitter from unlocking your vehicle. If a transmitter is lost or stolen, a replacement can be purchased through your dealer. Remember to bring any remaining transmitters with you when you go to your dealer. When the dealer matches the replacement transmitter to your vehicle, any remaining transmitters must also be matched. Once your dealer has coded the new transmitter, the lost transmitter will not unlock your vehicle. Each vehicle can have only four transmitters matched to it. Have each transmitter you intend to match ready for the next steps. To match transmitters to your vehicle:

    1. Turn the ignition key to RUN, then to OFF. This will disarm the Content Theft-Deterrent/Alarm System (if your vehicle has this option).

    2. Remove the RADIO fuse. This fuse is located in the main fuse block which is located on the left side of your instrument panel. The radio fuse is located on the lower right-hand corner of your instrument panel. See “Fuses and Circuit Breakers” in the Index.

    3. Turn the ignition key from OFF to RUN three times quickly (within five seconds). The vehicle will respond by locking the doors, unlocking the driver’s door and releasing the hatch. Your transmitter is now ready to match the vehicle. Leave the ignition in RUN.

    4. Press and hold the LOCK and UNLOCK buttons on the first transmitter for 15 seconds. The vehicle will respond as in Step 3.

    5. Repeat Step 4 for the remaining transmitters.

    6. When you have finished matching all of your transmitters, replace the RADIO fuse.

    7. Check that all transmitters work by pressing their buttons.

  5. #5
    Blown, Stroked, & Sprayed

    Ed Blown Vert's Avatar
    Join Date
    Aug 1999
    Location
    Arizona
    Posts
    51,364

    Black
    383 Procharged & N20 Vert

    I'm going to copy this to another forum

  6. #6
    BlackHawk T/A
    Guest
    Doesn't sound like that's worth 87 bucks, nor an hours time IMO.

  7. #7
    down in it 310stanger's Avatar
    Join Date
    Aug 2005
    Location
    nj
    Age
    41
    Posts
    11,020

    white
    90 Mustang 5.0

    to dealers it does when customers are not savvy enough to read the owners manual hehe.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Help: Keyless Entry Went Out
    By cammed goat in forum GTO
    Replies: 66
    Last Post: 10-12-2014, 09:07 AM
  2. keyless entry?
    By bh5432 in forum Stereo and Electronics
    Replies: 4
    Last Post: 04-03-2008, 08:43 AM
  3. keyless entry
    By emotionalpiracy in forum Computer & Tuning
    Replies: 3
    Last Post: 01-13-2008, 08:32 PM
  4. Keyless Entry Fob?
    By shlby123 in forum General Help
    Replies: 5
    Last Post: 02-03-2007, 09:47 PM
  5. Programing Keyless Entry
    By GOAT6SPD in forum Western Members
    Replies: 10
    Last Post: 09-07-2005, 02:48 PM

Members who have read this thread: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •