Power Window Probs 02 CAMARO

**blackcamarob4c** · 06-02-2008, 04:15 PM

Hey Yall I Got A 02 Camaro With Power Windows. The Drivers Side Goes Down A Few Inches Then Stops. Then I Wait A Few And It Goes A Little Farther Down. Then i Put Pressure Next Time And It Goes All The Way Down. Whats Up. Any Ideas. Then On The Way Up Same Thing. Gotta Pull It Up. Is It The Motor Heating Up? Or Some Kinda Other Electrical Part. Thanks For Help. Arrrrgggg

**rbob93** · 06-02-2008, 04:20 PM

Sounds like the motor is shot
Auto Zone $55

Put a new one in & install the fix from AutoTrix

**Insert** · 06-02-2008, 04:24 PM

www.autotrix.com

get the power window fix kit.

and a new motor to go with it is always a good idea.

**camaross19973** · 06-02-2008, 04:26 PM

Originally Posted by Insert

www.autotrix.com

get the power window fix kit.

and a new motor to go with it is always a good idea.

yea he beat to what i was going to say but yea

**Cutlass** · 06-02-2008, 04:27 PM

Its Autotrix.NET. and they don't sell a drivers window fix unless you want their express window kit$$$.
blackcamarob4c, you need a new window motor. Do a search on the install. Its not too fun!!

**Insert** · 06-02-2008, 04:30 PM

Originally Posted by Cutlass

Its Autotrix.NET. and they don't sell a drivers window fix.
blackcamarob4c, you need a new window motor. Do a search on the install. Its not too fun!!

yea, its .net

but you could use hte passneger window fix on drivers side, just different lengths of wires...

as for the install of motor yea its a bitch. stupid long doors and bog windows. i scratched my tint last time when it slipped. so be careful.

**blackcamarob4c** · 06-02-2008, 04:42 PM

Wow Quick Reply.....thanks Folks!!! Yeah I Just Did The Dr Side Of My Minivan What A Pain.i Was Wundering If The Camaro Would Be The Same. Is It Easy To Get The Panel Off And Pull He Motor Out? Is There A Web Site That Offers Any Ifo/help On This Repair. Thx

**Cutlass** · 06-02-2008, 04:45 PM

http://shbox.com/page/windowmotor.html

**blackcamarob4c** · 06-02-2008, 04:48 PM

thanks!!!! rock on

**Cutlass** · 06-02-2008, 05:00 PM

I don't know you're mechanical abilities, so BEWARE!
Please read as much info as you can on window motor replacement! The door is not metal, its fiberglass so if you F it up, its bad news bears. Sometimes it pays to pay someone to do it (if you can find someone to trust

)

**blackcamarob4c** · 06-02-2008, 05:24 PM

10 4 i copy that. thx

**Insert** · 06-02-2008, 05:57 PM

taking off the panel is easy.... its the juggling the window and motor and trying to get everything in place that gets tricky...

**rbob93** · 06-02-2008, 09:57 PM

Follow the intsructions in the link provided & you will have about an hour & a half of work.
Roll the window up & use two rubber door stops stuffed between the window & door like the instructions tell you & then you won't have to juggle the window.

**PFM** · 06-03-2008, 06:04 AM

I bought my motors from autozone and paid a local glass company to install them for me. They didn't charge but $90 to install both of them. Well worth it to me. Fiberglass and window glass sounds like a lot of trouble. Especially in this 90 degree heat we've been having.