Paint on FOG lights

**BiGPaPaSMuRF** · 02-12-2011, 05:47 AM

Some idiot painted the fog lights when they painted the car. How can I get the paint off without ruining the fog lights?

**024mula** · 02-12-2011, 06:10 AM

Is the paint, car body paint? If so, then check a body shop.

If its paint out of a hardward store, try "goof-off" paint remover (but don't leave it on the lens to long).

**JayTA98** · 02-12-2011, 06:10 AM

I sure there has to be some solvent out there. If not your other option is to remove them and sand them lightly until you revome the paint off. then use finer sanding paper to polish them. What kinda of dummy does this? lol unless the just wanted to black them out.

**JayTA98** · 02-12-2011, 06:11 AM

Originally Posted by 024mula

Is the paint, car body paint? If so, then check a body shop.

If its paint out of a hardward store, try "goof-off" paint remover (but don't leave it on the lens to long).

+1 on this if it is can spray paint the goof off will work fine. I used that product with great results.

**BiGPaPaSMuRF** · 02-12-2011, 08:41 AM

Im guessing its car paint bc when i bought the car it had a fresh paint job but they must have forgotten to cover the fog lights. Im wanting to go the cheaper alternative though so i guess its finding some paint remover that works or sanding it. I found this on LS1tech.com does any of yall know if these will fit on a camaro
http://www.ls1tech.com/forums/stereo...-easy-fix.html

**SSwt00SS** · 02-13-2011, 07:15 AM

0000-steel wool and elbow grease!

call me crazy but i would never take any grit sandpaper to any glass surface...

**JayTA98** · 02-13-2011, 07:38 AM

I don't know about your fog lights but mine are plastic.

**98maro** · 02-13-2011, 07:44 AM

+1 steel wool. And soap. That's all u need.

**BiGPaPaSMuRF** · 02-13-2011, 08:49 AM

I just took em off and very carefully scraped em with a knife and then washed them real good. Now there as good as new and no wonder i couldnt see at night with the low beams...haha