No IGNITION! HELP!

[onelife]

I don't have any ignition on my 02 Z28. I checked all my grounds but nothing loose. I install a Canton oil pan and when I went to fire it up, it ran for 20 or 30 seconds then just died and won't start. Have fuel pressure but no spark, starter keeps turning.

[02z28ls1]

Do you have any oil pressure? There is a safety sometimes on these vehicles-not sure on the f-bodies or not-which will prevent the engine from staying running if no oil pressure.Should pump up some pressure at cranking speed.I was watching a American Hot Rod show where the oil pump pickup was too close to the bottom of the pan and wouldn't get any oil pressure.This was a LS1 motor in the Alumatub incidently.

[onelife]

When the car was running the stock gauges read 40PSI for the oil. Is this to low for an LS1, I never really paid attention to where it's suppose to stay at, I think it's something high like 50 or 60 isn't it?