need some help down to the interior

**motavated** · 05-26-2011, 06:44 PM

I took out my gauge cluster to put auto meter phantoms gauges in. I can handle every thing but the speedo, does anyone know how and where i could tie it in

**Cutlass** · 05-27-2011, 02:54 AM

Not sure how your gauge works, but you'll probably have to tap into the Vehicle Speed Sensor wiring. The VSS is located in the tailhousing of the transmission and it wiring runs up directly to the PCM. Your looking for the purple and green wires from that sensor.

**motavated** · 05-27-2011, 06:51 AM

Thanks, Ill start there, I think I bit off more that I wanted, to late to turn around now

**motavated** · 06-17-2011, 05:22 PM

Originally Posted by Cutlass

Not sure how your gauge works, but you'll probably have to tap into the Vehicle Speed Sensor wiring. The VSS is located in the tailhousing of the transmission and it wiring runs up directly to the PCM. Your looking for the purple and green wires from that sensor.

Do you know what wire I need to tap into