need motor mount bracket

[dany3350]

So i took the motor mount driver side its a stock part made by anchor and i ordered nre inserts now im trying to reuse the brackets can i bec its darn hard to take them off from inside the bracket and if not r there any motor mount out there bec i cant find any for my 94 z28

[SMWS6TA]

After the mounts are off the frame and motor, you'll have to drill out 5 rivets in order to remove the OEM bushings.

Once you have the clam shell cracked open you can get the old mounts out fairly easily and put the new ones in. Make sure you follow the directions for the new mounts about their orientation because it DOES MATTER. You may need to put the clam shell and the new poly mounts in a vice together to get them to fit.

Bolt the clam shells back together and use some locktite if the mounts didn’t come with those nylon threaded nuts.

[dany3350]

Ok thanks a million will do so and would it be wise to change the other side passanger side too

[cammed goat]

Replace them in pairs is my best advice.

[SMWS6TA]