Results 1 to 6 of 6
-
08-05-2016, 12:03 PM #1
- Join Date
- Oct 2005
- Location
- Vicksburg. Ms.
- Posts
- 461
pewter- 99 Trans Am
Need help with my front seats in my 99 ta .
The seats in my 99 ta will not do anything, I have no fire coming to the motor, I have checked the fuse box located inside of the car, there is fire at the fuse box but nothing at the main wire feeding the motors, under the seat, is there a relay somewhere that I don't know of? need help.
-
08-05-2016, 02:51 PM #2
- Join Date
- Jan 2009
- Location
- North Jersey
- Posts
- 11,496
Phantom Black Metallic- 2004 GTO M6
I don't think there are any relays, but I could be wrong. Have you checked the wires under the seats to see if anything is corroded or broken?
extreme dimensions, driveshaft shop, harrop, hid(35watt/6k) lows, hurst, k&n, led fogs, maverick man, mishimoto, nitto, revshift, slp, stern st-1, smoked sidemarkers, whiteline poly radius rod bushings
-
08-05-2016, 03:12 PM #3
- Join Date
- Sep 2010
- Location
- Bel Air, Maryland
- Posts
- 1,675
Silver- '02 Trans Am WS-6, 6M
The power seats and the rear defroster are both linked to a silver metal 30 amp circuit breaker that is in the fuse block on the drivers side of the dashboard that is facing the drivers door.
Check to see if you can turn on your rear defroster, if that doesnt work as well, the circuit breaker is probably bad. As of two years ago, GM still sold the circuit breakers, I think they were $10-15 each at the dealer, I never could find an aftermarket one.
-
08-06-2016, 10:06 AM #4
- Join Date
- Oct 2005
- Location
- Vicksburg. Ms.
- Posts
- 461
pewter- 99 Trans Am
after posting I went back out side and started thinking about what might be wrong after checking the fuses and the circuit breakers there was fire so I started pulling and checking the wiring under the seat and found a connector with a hot and a ground wire ,the hot wire had broken so I have repaired it and now everything works but the seat motion back and forward. I have tried to bump the motors with a hammer but there is three motors and I have had no luck.which one of the motors is the one for the seat to move back and forward. want to remove it and check it off the seat. all the seat do now is make a bumping sound like it may be stuck.
Last edited by Street Fighter; 08-06-2016 at 10:09 AM.
-
08-08-2016, 06:07 AM #5
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,759
Navy Blue Metallic- 98 T/A w/ mods, 00 FBVert
It should be the one that is along the inside rail of the seat.
Power seats are nice, but in times like this I would prefer the self adjusting seats....
-
08-08-2016, 01:22 PM #6
- Join Date
- Sep 2010
- Location
- Bel Air, Maryland
- Posts
- 1,675
Silver- '02 Trans Am WS-6, 6M
SLP Air Lid/Smooth Bellows
L76 6.0L block, PRC Ported 243 heads, Texas Speed 224R cam.
Kooks Emissions LT Headers/Catted Y pipe
NGK TR55 plugs
Magnaflow Cat-back
Spohn Front Upper Tubular Control Arms
UMI Front Lower Tubular Control Arms
UMI Front Sway Bar
UMI Rear Lower Control Arms/ Adjustable Panhard Rod
UMI Welded-on Two Piece Subframe Connectors
Factory C5 Z06 17x9.5 wheels w/ 285-40-17 Continental Extreme Contact Sports all the way around.
Dyno Dynamics dynoed @:
415 rwhp
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Wanted: ..:::pontiac gto seats - front, both:::..
By ne0fiend in forum Parts Wanted / TradeReplies: 0Last Post: 02-28-2012, 11:10 AM -
WTB 98-02 T/A front seats
By fbodyNATION in forum Parts Wanted / TradeReplies: 0Last Post: 07-14-2011, 05:05 PM -
GTO front seats ..
By snaggeltooth in forum GTOReplies: 4Last Post: 12-13-2009, 09:39 PM -
WTB: Front Bumper and Front Seats
By chellzers in forum Western MembersReplies: 0Last Post: 11-21-2008, 11:20 AM -
Front Seats
By BA2000SS in forum Parts Wanted / TradeReplies: 0Last Post: 11-11-2005, 10:24 AM
Bookmarks