Results 1 to 4 of 4
Thread: Need advise on oil and tune up
-
07-18-2012, 10:26 AM #1
- Join Date
- Jul 2012
- Location
- Va
- Posts
- 68
Black- 94 Z28
Need advise on oil and tune up
Ok so i got to change the oil of my 94 z28 and it was dark i think it even hade a brand of oil filter no longer made i dont know what person wouldnt change the oil but im sure it effected the car in some way i want to know what i can do to clean all that build up inside the motor need to know what to clean and what to replace thanks
-
07-18-2012, 10:32 AM #2
- Join Date
- Jan 2009
- Location
- North Jersey
- Posts
- 11,496
Phantom Black Metallic- 2004 GTO M6
You could try a can of engine flush. Some here use fresh oil and drain it out again after running the engine a few minutes. As for the oil filter, change that after you clean the engine out. I personally use Purolator filters. Do you plan to use regular oil or synthetic after the oil change?
As far as tuning up the car, if it's stock, stick with OEM plugs and wires.
-
07-18-2012, 04:58 PM #3
- Join Date
- Jul 2012
- Location
- Va
- Posts
- 68
Black- 94 Z28
Ok i stuck with regular this time and there are alot of things i still dont know about the car not sure if its cam is stock or gears bec man is that thing fast ill get some new spark plugs and begin from there however there is one major thing i noticed the cars front left exhust makes a hissing noise when it starts could this mean it needs a new gasket
-
07-18-2012, 06:53 PM #4
- Join Date
- Jun 2011
- Location
- Branchville, NJ
- Posts
- 3,111
Silver & Blue- 02 Camaro SS, 04 GTO
While you are changing the exhaust manifold gaskets it is a good time for headers and plugs. JMHO
My ride is a 2002 Camaro SS SLP #3296 with 30k, LTH, 3" Y, CME, Frost tune, K&N, ported TB, Blackwing lid, Bellows, MSD, Denso Iridium, and 85mm MAF, Bilsteins, Eibach springs, SLP strut brace, Adj. Panhard, TA Girdle, UMI, Pro 5.0, Nitto NT555
My wife has a 2004 GTO with the rare SAP, 18" wheels, K&N Cold Air System, MSD, Ported TB, Frost tune, Denso Iridium, Flowmaster cat-back, 3200 Yank, 75k
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Need some advise.
By Levilz in forum Internal EngineReplies: 2Last Post: 05-31-2009, 06:57 PM -
need advise
By 01tao6gto in forum Internal EngineReplies: 6Last Post: 04-21-2008, 08:19 PM -
whats the diff with a full dyno tune and a street tune?
By Justin23454 in forum Computer & TuningReplies: 6Last Post: 12-04-2007, 06:31 AM -
Handheld Tune?shop Tune? software running on my laptop tune?on my SS
By showtimesteele99SS in forum Computer & TuningReplies: 4Last Post: 04-09-2007, 05:31 AM -
Advise about a CAM
By SSwt00SS in forum Internal EngineReplies: 13Last Post: 05-14-2006, 06:36 AM
Bookmarks