Results 1 to 13 of 13
Thread: MAF
-
06-17-2010, 06:56 PM #1
- Join Date
- Feb 2010
- Location
- north bay california
- Age
- 34
- Posts
- 2,973
Black- 00 camaro ss M6 #6695
MAF
I can't take the MAF out of the lid. How can I do it?
Thanks
I'm jst tryin to clean it with MAF cleaner
should I clean it with that big piece on the side?
It's the stock one
-
06-17-2010, 06:58 PM #2
heat it with a hair dryer....it'll come right out.
-
06-17-2010, 07:02 PM #3
- Join Date
- Feb 2010
- Location
- north bay california
- Age
- 34
- Posts
- 2,973
Black- 00 camaro ss M6 #6695
Ok thanks. I'll try that
is it safe if the MAF cleaner gets on the sensors?
-
06-17-2010, 07:18 PM #4
- Join Date
- Feb 2010
- Location
- north bay california
- Age
- 34
- Posts
- 2,973
Black- 00 camaro ss M6 #6695
Done!!! That thing was bad
it lookd clean I never tought it would need it
now that I jst clean it
it looks way better hopefuly I feel a diference
-
06-17-2010, 07:48 PM #5
-
06-17-2010, 08:03 PM #6
- Join Date
- Feb 2010
- Location
- north bay california
- Age
- 34
- Posts
- 2,973
Black- 00 camaro ss M6 #6695
Yeah it worked!
Nice. And the thing that the cleaner is made for that
I noticed the throttle body was very dirty inside. Do I clean that too?
Or wat do I use
-
06-17-2010, 08:06 PM #7
that throttle body is very easy to take off which would make cleaning the backside of it easier. I normally use carb cleaner but in a pinch you could just use that maf cleaner if you wanted. Would be a good time to do the throttle body bypass. Just make sure you purge the air from the cooling system if you take the tb completely off. You can probably clean it fine just by spraying it real good without taking it off.
-
06-17-2010, 08:23 PM #8
- Join Date
- Feb 2010
- Location
- north bay california
- Age
- 34
- Posts
- 2,973
Black- 00 camaro ss M6 #6695
I was thinkin to take it out n clean it with gasoline.
Bt the the carb cleaner or the MAF.
I am gonna bypass the TB
I'm gonna get a polished/ ported TB
i'm gonna do it when I get the slp air lid
one other thing I wanted to do.
Cut the EGR tube inside the intake manifold
-
06-17-2010, 08:27 PM #9
sounds like you're on the right track.....get all the free/cheap/easy stuff knocked out first.
-
06-17-2010, 08:35 PM #10
- Join Date
- Feb 2010
- Location
- north bay california
- Age
- 34
- Posts
- 2,973
Black- 00 camaro ss M6 #6695
I had all that on my last z28 ls1
it did made a differense. They were done by the owner b4 me
where can I find all the free mods or if you could tell me some. Thanks
I kne the bypass tb. Cut the EGR tube
n I forgot the other ones
-
06-17-2010, 11:42 PM #11
theres a stickie somewhere out there....i tried looking for it but its too late, ill find it for you tomarrow haha
-
06-18-2010, 06:25 AM #12
- Join Date
- Feb 2010
- Location
- north bay california
- Age
- 34
- Posts
- 2,973
Black- 00 camaro ss M6 #6695
Lol ok
I alreciate that
thanks for takin the time to help me out
-
06-18-2010, 06:44 AM #13
- Join Date
- Feb 2010
- Location
- north bay california
- Age
- 34
- Posts
- 2,973
Black- 00 camaro ss M6 #6695
Lol ok
I alreciate that
thanks for takin the time to help me out
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks