Results 1 to 4 of 4
Thread: Kill Switch Issue??
-
11-26-2007, 08:11 PM #1
Kill Switch Issue??
I am in the middle of gutting the interior of my TA down to the sheet metal in the cabin. After I installed Dynamat I lost all current to the starter. Everythign else is fine but my car won't even try to start. I had to keep cranking it durring the day as I was listening to the radio and kept draining the battery. Finally it was just completely dead. I gave the battery a full charge, all of the accessories, lights etc work...even the roof, just not the starter. I reset the brain already. Any ideas? Is it possible I engaged the factory kill switch?
-
11-27-2007, 06:02 AM #2
no i don't think so, if you did i think the security light on the dash flashes or something. It's possible the fuse or relay is cooked.
-
11-28-2007, 02:08 PM #3
- Join Date
- May 2007
- Location
- Seattle
- Posts
- 88
Purple- 1998 T/A convertable
more likely to took off a ground thta went from engine to firewall.
-
12-08-2007, 07:29 PM #4
Where would I begin to look? It hasn't been a big deal because my car has been in a few hundred pieces BUT I am making some progress and hope to be done by the end of the month. It will just blow to have a car looking as great as mine will (tooting my own horn here) and it not be able to crank.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help: Kill switch ideas
By tangkiller_z28 in forum General HelpReplies: 10Last Post: 06-19-2014, 10:59 AM -
Question: Kill switch
By 98maro in forum General HelpReplies: 30Last Post: 03-21-2011, 09:51 AM -
Kill switch?
By Spikito in forum Stereo and ElectronicsReplies: 24Last Post: 04-18-2010, 11:45 AM -
Help: Kill switch
By 98maro in forum General HelpReplies: 0Last Post: 04-13-2010, 01:57 PM -
Kill Switch
By tep98ws6 in forum Stereo and ElectronicsReplies: 7Last Post: 07-13-2009, 08:30 PM
Bookmarks