Injector cleaner

**JEFF01Z** · 01-23-2007, 06:15 AM

Does anybody know where I can get the adapter that goes on the pressurized can? Mine is leaking and thought it would be cheaper to just replace that rather than buy the whole setup again.

**Steve Crowe** · 01-25-2007, 06:20 PM

Which brand of injector cleaning kit do you have?

**2manycis** · 01-25-2007, 10:25 PM

like one of the fittings? go 2 your local hardware store

**JEFF01Z** · 01-26-2007, 11:21 AM

Originally Posted by Steve Crowe

Which brand of injector cleaning kit do you have?

It is the BW CST70 kit. I went to my local Napa store and they looked at me like I was crazy.

I thought about buying your set up since it hooks up to the same cans and looks like it could be used with various adapters in my kit.

I might be able to take it apart and replace some orings or seals, it leaks out the top were stem for the shut off valve is.

**Steve Crowe** · 01-26-2007, 04:14 PM

If I recall all your adapters will fit our kit but ours is a bit different from the B-W in the way it hooks up to the cans. Works well though - especially for the price.

Do you have an O'Reillys there? They seem to do better with B-W parts, even Pep Boys used to have access but I'm unsure if they still do or if they'd even be willing to help.

Not much help here though, wonder if they quit making it?

Ours doesn't use them due to the price but I know a Freeze 12 can tapper wiull screw on the cans but you have to modify the needle valve. Some years back the cans were easy to tap, then California forced them to modify the cans so they had an integral valve and seal to prevent leaks if you didn't use all the cleaner up, Heaven help us if a few drops of what is basically gasoline with some harmless synthetic detergents gets into the air. Oddy enough, one of the detergents is morpholine oleate which is more commonly used to dissolve food grade wax so they can spray it on fruit that's being shipped to grocery stores. :-)