Results 1 to 4 of 4
Thread: Hi
-
09-21-2007, 03:51 PM #1Member
- Join Date
- Mar 2007
- Location
- Los Angeles
- Age
- 50
- Posts
- 238
blue- 1999 camaro ss #976
Hi
i have a problem with my horn, it went out and i looked at the fuses and they r all good, and changed the relay fuse and still not working. what else can i look at to fix my horn
-
09-21-2007, 04:37 PM #22 SS's are better than 1
- Join Date
- Jun 2007
- Location
- Lathrop, Missouri
- Posts
- 2,482
NBM / Silver- 00 SS / 71 SS Elcamino
might have a chaffed wire going to your loudspeaker? Just a guess?
-
09-21-2007, 06:37 PM #3Member
- Join Date
- Mar 2007
- Location
- Los Angeles
- Age
- 50
- Posts
- 238
blue- 1999 camaro ss #976
i dont think cuse my alarm sounds good
-
09-21-2007, 07:29 PM #4Senior Member
- Join Date
- Aug 2005
- Location
- Roseville, CA
- Posts
- 8,164
05 Wrangler- 00 Z28 sold :-(
It could be the horn (or horns, my truck has two but I can't remember if my Z did
) itself...i'd troubleshoot the whole system if I were you.
Try disconnecting the connectors from the horn/s and check for voltage while someone pushes the horn. Since you already replaced the relay if you don't get anything you probably have a open in the wire from the relay to the horn. If you do get voltage check the ground (should be 0 ohms)...if both are good then you have a bad horn
If the ground is bad then fix it...
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks