Results 1 to 1 of 1
-
08-11-2019, 06:19 PM #1
- Join Date
- May 2006
- Location
- Suthern California
- Age
- 42
- Posts
- 4
Navy blue metallic- 2000 Z28 Camaro
HELP - Trouble installing the Dorman 615-900 (LS6) intake
I am aware that I used "Break" instead of "Brake"
The car: 2000 Z28
Resolved problem
- Coolant pipes - This issue has been resolved. I installed the front assembly and plugged the rear inputs
The problem
- As you can see, in the LS1 intake, the MAP sensor, Break booster and HVAC Control are located in the same area. In the Dorman intake, the MAP sensor and the Break booster are also located in the same area, but the HVAC Control is not. By taking a look, it would seem that the HVAC Control input in on the side of the intake, is that correct? And if so, would I be encountering an additional problem by moving the location of the HVAC Control input?
Besides the problems that I've encountered during the installation, are there other things that I need to watch out for?
I thought that it was going to be a directly/plug and play, but I'm realizing that it might need some fabbing.
[IMG]I am aware that I used "Break" instead of "Brake" The car: 2000 Z28 Resolved problem - Coolant pipes - This issue has been resolved. I installed the front assembly and plugged the rear inputs The problem - As you can see, in the LS1 intake, the MAP sensor, Break booster and HVAC Control are located in the same area. In the Dorman intake, the MAP sensor and the Break booster are also located in the same area, but the HVAC Control is not. By taking a look, it would seem that the HVAC Control input in on the side of the intake, is that correct? And if so, would I be encountering an additional problem by moving the location of the HVAC Control input? Besides the problems that I've encountered during the installation, are there other things that I need to watch out for? I thought that it was going to be a directly/plug and play, but I'm realizing that it might need some fabbing.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]Last edited by joelx21; 08-11-2019 at 06:30 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Dorman window motors
By 1998 T/A in forum Parts For Sale / TradeReplies: 0Last Post: 09-11-2015, 09:46 AM -
Question: Installing new ZO6 intake w/injectors & MAF
By SILVER BULLETT in forum External EngineReplies: 1Last Post: 08-30-2010, 06:15 AM -
installing intake
By david_viny in forum External EngineReplies: 5Last Post: 07-25-2008, 08:31 PM -
Soooo.... i was installing my intake
By Z28_SS in forum External EngineReplies: 10Last Post: 02-29-2008, 02:58 AM -
installing intake right now?????`
By sszcam in forum External EngineReplies: 1Last Post: 04-14-2007, 05:16 PM
Bookmarks