Help with installing clear corners

**99_LS1** · 05-03-2007, 01:52 PM

Sorry if this is in the wrong place.

I bought a set of clear corners for my z28 and was looking at how to switch them in. I tried a search but didn't get much info. This probably is a lot simplier then it seems. There was a tutorial on ls1tech but it's not helping me either. I was looking at how to do it from the top but don't see how the headlight comes out. I'm assuming once that's out the signal itself shouldn't be so bad, right? Any pics or detailed info on how to go about this? Thanks a lot.

**BIG D's SS** · 05-03-2007, 01:56 PM

Originally Posted by 99_LS1

Sorry if this is in the wrong place.

I bought a set of clear corners for my z28 and was looking at how to switch them in. I tried a search but didn't get much info. This probably is a lot simplier then it seems. There was a tutorial on ls1tech but it's not helping me either. I was looking at how to do it from the top but don't see how the headlight comes out. I'm assuming once that's out the signal itself shouldn't be so bad, right? Any pics or detailed info on how to go about this? Thanks a lot.

I did mine from the bottom, but most do it from the top. Most guys pull there headlights and put them in from the top. Just be careful of wrestling them out of the bumper cover or you might tear it in the corners. Just take you time and you want have any problems.

**99_LS1** · 05-03-2007, 04:26 PM

^ How did you do them from the bottom? I cannot get the freaking headlight out, I'm about to give up. I read theres 1 bolt and then take the bulbs out (I can't see/get that either). I'll try it from the bottom but nothing at all came up for that. thanks

**greatwhiteZ28** · 05-03-2007, 05:37 PM

what brand are they? how much did you pay

**danziger** · 05-04-2007, 05:55 AM

I took the whole urethane bumper cover off when I did mine. It made the job super-easy. However, most people take the headlights out. Good luck!

**txman4362** · 05-04-2007, 06:43 AM

did mine from the bottom....3 botls and about 30 minutes time

**99_LS1** · 05-04-2007, 10:46 AM

I got them from neweraperformanceparts.com, I posted somewhere a while ago wondering if there were specific kinds etc, was told they're all mostly the same. Anyways I got one side done, and partially removed the bumper. The passenger side seems like it's gonna be a little more difficult, but we'll see what happens. thanks!