Results 1 to 3 of 3
Thread: Help! Aluminum 5.3
-
10-10-2009, 11:46 AM #1
- Join Date
- Oct 2009
- Location
- TN
- Posts
- 3
grey- drag car
Help! Aluminum 5.3
This is all new to me. My first ls engine and its going in a drag car. My plan is the install a holley on a victor jr. intake and progamable msd controller. My question is stock cam or buy a different cam.
-
10-10-2009, 11:50 AM #2
If your talking about a 1320 Drag car your gonna wanna pull the cam and valvetrain and upgrade, thats where your going to find most of your gains. Depending on which intake and carb combo your going with i would check and see which cam would mesh well.
Or you can take a look at your budget and ur ultimate goals and gear your build towards that direction.
J2001 SS, Its not the car its the Driver that matters....
-
10-10-2009, 01:27 PM #3
- Join Date
- Oct 2009
- Location
- TN
- Posts
- 3
grey- drag car
This is a full out race car I run it at a local track. Now it has a 350 with a powerglide and I was going to replace engine with the ls I bought. I am going to carborate the ls. The car is geared 4:10 now and runs 7.70 in the 1/8 mile. (100 shot of nitrous)
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
will this Aluminum Driveshaft fit?
By QuicSS in forum DrivetrainReplies: 2Last Post: 03-11-2009, 10:30 AM -
Question: Aluminum frames?
By TOPORANGER in forum CorvetteReplies: 1Last Post: 03-06-2009, 04:03 PM -
60' and the aluminum ds
By silverz28camaro in forum Drag RacingReplies: 8Last Post: 01-11-2008, 10:55 AM -
wtb aluminum driveshaft
By 89 406 6speed in forum Parts Wanted / TradeReplies: 1Last Post: 06-18-2007, 06:50 PM -
Aluminum Balancer
By FuzzyMcGee in forum External EngineReplies: 0Last Post: 02-21-2007, 08:29 AM
Bookmarks