Results 1 to 12 of 12
Thread: Help
-
02-14-2008, 12:58 PM #1
- Join Date
- Jun 2007
- Location
- North Carolina
- Posts
- 41
Yellow and Black- 2000, Trans Am WS6
Help
HEy guys i just received my 98-02 LS1 Whisper Motorsports Airbox Lid and....IT DOSENT FIT. It wont latch, plz help i'm sooo pissed right now
Last edited by sunsetorangess; 02-16-2008 at 09:53 AM.
-
02-14-2008, 01:30 PM #2
- Join Date
- Sep 2005
- Location
- TEXAS... U mad?
- Posts
- 6,158
Black / Stryker Blue- 2K WS.6/ 2K9 G8GT
Speedtek lids don't latch well either... have to push them back really hard and tuck the lid behind the front lip of the box...
-
02-14-2008, 01:34 PM #3
-
02-14-2008, 01:39 PM #4
mine latched with no problem!!
-
02-14-2008, 01:44 PM #5
most all lids are a bear to get latched until you get them figured out. Make sure the lid is seated all the way into the bellows and the tabs are into the slots.
-
02-14-2008, 01:48 PM #6
- Join Date
- Jun 2007
- Location
- North Carolina
- Posts
- 41
Yellow and Black- 2000, Trans Am WS6
what do you mean seated into the bellows??? it fits flush on top
-
02-14-2008, 01:56 PM #7
- Join Date
- Jul 2005
- Location
- Jacksonville, FL
- Posts
- 2,723
Push it hard all the way back into the tabs, and make sure the lower lip of the lid (between the clamps) is inside the upper lip of the air box. Installuniversity.com has a whisper lid install article.
-
02-14-2008, 02:31 PM #8
On my SLP lid I had to cut about a 1/2 in off the back of the bellows for it to close right.
-
02-14-2008, 04:50 PM #9
- Join Date
- Jun 2007
- Location
- North Carolina
- Posts
- 41
Yellow and Black- 2000, Trans Am WS6
OMG....... i feel like a total dumbass.....i called tech support at WS6 store and he explained it better than those stupid ass directions....i Thought it mounted flush all the way around.....that is were i fucked up. I went out side and pushed the front lip into the bellow and they clamped right on....oooo and by the way guys I got my Z06 wheels today too and they kik ass i'll post pic's this weekend...thanks soooo much guy's for all the help
-
02-14-2008, 05:05 PM #10
-
02-14-2008, 05:52 PM #11
-
02-14-2008, 05:54 PM #12
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks