firewall holes..

**98maro** · 05-04-2011, 05:12 PM

i need some help here... i want to run some cables through the firewall on my 00 ss.. where can i find a hole?? on my 98 z it had a hole on the drivers side under the master cylinder or somewhere around there,, but this one dont have it,,,

thanks 4 the help.. if its on the drivers side is better..

**cammed goat** · 05-04-2011, 05:16 PM

Just trace wires that run through the firewall. Make sure they have grommets. You don't want to cut brand new wires and short anything out.

**98maro** · 05-04-2011, 05:23 PM

Originally Posted by cammed goat

Just trace wires that run through the firewall. Make sure they have grommets. You don't want to cut brand new wires and short anything out.

thanks

ill take a look right now and see what i can find

**cammed goat** · 05-04-2011, 05:27 PM

On my last car, I had a gauge pod with AF ratio and vacuum gauges. For the vac gauge, I ran the hose through the boot where the steering linkage went through the firewall and sealed around the hose with clear silicone. Worked like a charm. What wires are you running? Gauges?

**98maro** · 05-04-2011, 05:33 PM

Originally Posted by cammed goat

On my last car, I had a gauge pod with AF ratio and vacuum gauges. For the vac gauge, I ran the hose through the boot where the steering linkage went through the firewall and sealed around the hose with clear silicone. Worked like a charm. What wires are you running? Gauges?

ill try that...

no not yet,, i want to get gauges but better quality now,, i had jdm.. crap.

its for a microphone speaker i wanna put behind the bumper.. just for fun,