Results 1 to 6 of 6
Thread: Egr
-
02-17-2008, 11:24 AM #1
Egr
i need some info. im installing slp long tube headers on my 1999 trans am, and i got one problem. the stock manifold on the passenger side has two valves on it, but the headers only have one. im stuck on that one part and its driving me nuts, also i need to programmer, anyone got any suggestions?
-
02-17-2008, 03:00 PM #2
If it only has one then they are the wrong ones but you can take the egr off and get a LS1 tone all you well need is a 1 3/8 plug for the intake
-
02-17-2008, 04:48 PM #3
- Join Date
- Sep 2005
- Location
- TEXAS... U mad?
- Posts
- 6,158
Black / Stryker Blue- 2K WS.6/ 2K9 G8GT
rubber freeze plug that is. or just cut the port off the stock manifold, and weld it to the header...
-
02-17-2008, 05:41 PM #4
- Join Date
- Dec 2007
- Location
- Bethlehem,pa
- Posts
- 31
Black- 2002 Ram Air Trans AM
Help
I hope U know that those headers have shity ground clearance i have them and i'm gettin rid of them for pacesetter LT's. and another thing don't lower ur car u will scrap everywhere i know i do Just my 2cents
-
02-18-2008, 11:21 AM #5
ok i think ill block it off, what about the other two flanges on the headers? should i block them off as well? also where would i get a 1 3/8 freeze plug???
-
02-18-2008, 10:14 PM #6
- Join Date
- Sep 2005
- Location
- TEXAS... U mad?
- Posts
- 6,158
Black / Stryker Blue- 2K WS.6/ 2K9 G8GT
the plug you can get at AZ or O'rielly's... the other flanges are for the AIR system.. Delete if you want, you can turn off the codes it will throw for EGR, and AIR with a tune.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks