Results 1 to 5 of 5
Thread: driver door window molding
-
07-08-2009, 02:56 PM #1
- Join Date
- Jan 2009
- Location
- Tallahassee
- Posts
- 28
dark blue- 2000 ss # 7999
driver door window molding
anybody out there that can help me with the window molding/seal on the drivers side. i have a 2000 ss ,the molding where the glass meets the door on the outside.it will not stay down.are there snaps or something inside the door that hold it in place? it leaves a little gap that is just driving me crazy.my ocd is kicking in.please help.thanks
-
07-08-2009, 08:20 PM #2
- Join Date
- Jun 2008
- Location
- Rochester, NY Rochesterracing.com
- Posts
- 1,276
- 2000 Camaro B4C
i have the same damn problem it is a pain in the ass to deal with i'd love to know how to fix it
-
07-09-2009, 04:50 PM #3
- Join Date
- May 2009
- Location
- jefferson city
- Posts
- 122
green- 1994 camaro
hey guys i just took apart my door panels and stuff to replace my motor and im kinda stuck bcuz i don't know how to actually remove the motor.. anyway its a 94 camaro and i was haveing the same problem. wat i found is that there is like 2 bolted on support pieces that have a soft material up against the window. well the glass just slides on that but one of mine has the soft material missing causing my gap. don't know if that helps your gaps but it should fix mine. now to figure out how to remove the glass and replace the damn motor......
-
07-09-2009, 05:37 PM #4
- Join Date
- Jan 2009
- Location
- Tallahassee
- Posts
- 28
dark blue- 2000 ss # 7999
go to university install.it will tell you how to replace motor.
-
07-09-2009, 06:05 PM #5
- Join Date
- Aug 2005
- Location
- Ft. Lauderdale, FL
- Age
- 75
- Posts
- 2,706
Sebring Silver- 2000 CamaroSS
Or go here.....
http://www.ls1.com/forums/showthread.php?t=8307
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Wanted: Driver's side power window/door lock switch for a Camaro
By White Knight in forum Parts Wanted / TradeReplies: 0Last Post: 02-05-2012, 12:16 AM -
Help with window molding
By steves2000ss in forum Camaro / SSReplies: 1Last Post: 07-13-2009, 07:38 PM -
need driver door/w window
By LS1buckey in forum Appearance SectionReplies: 2Last Post: 03-18-2008, 04:56 PM -
Door molding???
By bwinch in forum Appearance SectionReplies: 6Last Post: 02-21-2007, 10:21 AM -
Outside Window Molding/Strip
By Sinister Z in forum General HelpReplies: 0Last Post: 12-09-2005, 03:06 PM
Bookmarks