catch can install

**Ramairgod84** · 07-06-2010, 06:59 AM

So i should have my catch can from ws6 store here on thursday, and i was wondering how people mounted them. The kit doesnt come with a bolt for the head, so what size bolt is needed for the head?

***SMWS6TA*** · 07-06-2010, 07:56 AM

Are you mounting it where the egr used to be (if you removed it)? If so, do you still have the bolts?

**Ramairgod84** · 07-06-2010, 08:08 AM

ive got an 01 so i dont have the egr. it would be on the front of the pass. side head

**Cutlass** · 07-06-2010, 06:47 PM

**Ramairgod84** · 07-09-2010, 08:45 AM

well I installed mine last night. It took me longer than expected because alot of installed pictures are misleading. In alot of pictures it has both tubes running to the throttle body/intake area are. One connecting to the piece on the intake and pcv valve, and the other somewhere underneath where the intake ant tb connect. In my case, i used the hose coming off of the pass valve cover, to run it to the top connection on the can, and then used the bottom connection to go to the pcv valve. Did i do it right? Also, how do you drain this thing? do you have to pull it all out including the hoses and drain it, or can you drain it somehow from underneath? although it doesnt look like there's anywhere for it to go

**Cutlass** · 07-10-2010, 05:20 AM

I believe your can is hooked up correctly. Hard to tell from the pic, it kinda dark.
I installed the LS6 PCV valley cover, that why mine goes under the intake.