Blower Motor Issue: Continued

**Jmmills92** · 03-18-2014, 05:58 AM

Okay so I have isolated the problem. There is a purple and black wire pigtail connector that plugs straight into the blower motor itself and appears to be its primary source of power. If possible I need to know exact name of this pigtail. Also I need to know if I could just take the plastic housing off and re splice the wires.

Basically if you wiggle the end of the connection it works just fine. The blower motor has been pulled and tested it works just fine. It is this connection. Any ideas!?

**stevews602** · 03-19-2014, 06:07 PM

I do not see why you could not just splice it. The connector is Part # 1206-4829, 2 way F Metri-pack 480 series with black wire the ground and purple the voltage from the switch. This does not look like an easy connector to find, I'd try the salvage yard.

**Jmmills92** · 03-20-2014, 05:50 AM

Originally Posted by stevews602

I do not see why you could not just splice it. The connector is Part # 1206-4829, 2 way F Metri-pack 480 series with black wire the ground and purple the voltage from the switch. This does not look like an easy connector to find, I'd try the salvage yard.

I did and after replacing the connection it turns out it was on the female end -_- lol. Sorry problem solved! Thanks