Results 1 to 2 of 2
Thread: All O2 sensors
-
07-10-2009, 03:15 PM #1
- Join Date
- May 2009
- Location
- tyrone
- Posts
- 8
- 98 Z28
All O2 sensors
Codes are PO131, PO137, PO151, PO157. They only happen when the RPM's get around 4000 and then the car runs like shit for 3 or 4 days. After which the SES goes out and it runs sort of normal until i push it and the cycle goes on. For about 3 months i have been dealing with this. Cleaned the MAF, new plugs and wires, changed fuel filter. MODS are a cat back Magnaflo and a SLP lid. I am pretty sure the SES was on before the mods i did not have a reader then. It is getting worse as time goes on. Any help would be apprechttp://www.ls1.com/forums/images/smilies/giveup.gifiated.
-
07-12-2009, 02:41 AM #2
You've got codes for front and rear sensors, both sides indicating a lean condition. First, reset the PCM that will clear the codes and recent history. Then make sure you don't have any exhaust leaks that would be causing a bad reading.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
O2 sensors
By c5z28 in forum Computer & TuningReplies: 27Last Post: 10-06-2010, 01:35 PM -
O2 sensors
By Soltakr in forum External EngineReplies: 19Last Post: 05-20-2008, 09:09 PM -
02 sensors
By 02sscamaro in forum General HelpReplies: 25Last Post: 04-16-2008, 04:02 AM -
o2 sensors
By ls1_02 in forum General HelpReplies: 9Last Post: 01-10-2008, 08:51 AM -
Should I buy new sensors?
By EastTNZ28 in forum General HelpReplies: 0Last Post: 06-15-2007, 09:14 PM
Bookmarks