ac not working

**gillahoon** · 07-27-2009, 04:00 PM

ok been having problem with my ac blowing fueses so the other day it blew a fues and when i replaced it and ac still didnt work. so then i replaced the ac relay and it still dont work. i dont hear the compresser kicking on to make cold air. any idea what can be goin on.

**michaelinchains** · 07-27-2009, 04:07 PM

could very well be the clutch on the a/c compressor

**mbrownin** · 07-27-2009, 04:11 PM

Might sound stupid, but make sure you didn't simply throw the AC belt. I didn't have any fuse problems, but mine stopped working awhile back, and it was because the belt had broken.

**michaelinchains** · 07-27-2009, 04:18 PM

my GTP was doing the same thing as his car,but my car wouldnt crank over.i replaced the compressor & a/c clutch w/ a junkyard one,flushed & filled the system & all is well

**Customta98** · 07-27-2009, 04:49 PM

Yeah it sounds like the clutch for the AC compressor burned up. I say just remove it and take your T-Tops off (if you have them) that worked for me lol.

**jmurphyws6** · 07-27-2009, 06:27 PM

un plug the compressor and see if the fuse still blows,if not your problem is the a/c clutch

**gillahoon** · 07-28-2009, 06:37 PM

well when i turn on the ac now the fuse dont blow but on the same token the compresser dont kick on

**gillahoon** · 08-02-2009, 09:19 AM

ok found the problem i burnt up the connector and all the way up the wire. I dont know how far its burnt wire goes so here is my question.

1 does any wire hook in to the 2 wires that go from the fuse to the ac compressor casue i really dont want to fish out all that wire.
2 can i just get the wire from the fuse box too the ac compresser, cause as i got up from the ac compresser looked like 4 wire were all looped with a little restor.

so i just want to bypass ever there and run new wire from the fuse box to the compressor