Page 1 of 8 12345 ... LastLast
Results 1 to 20 of 156
  1. #1
    Member The_Wretched's Avatar
    Join Date
    Jan 2008
    Location
    Miami, FL
    Age
    41
    Posts
    378
    2002 CETA 6M COUPE

    5 quarts or 5.5 quarts??

    just did my first oil change. went with mobil1 5w30 cuz the change oil light came on sooner than expected.

    now i thought 5 quarts is enough? but i heard from someone else that it should be 5.5?

    i checked the level again and it was fine... should i put in another .5 quart?

  2. #2
    Member nate_the_great17's Avatar
    Join Date
    Aug 2007
    Location
    fortworth
    Posts
    224

    81 camaro
    2001 trans am ws6

    i put 5.5 quarts

  3. #3
    Bone it like you own it FORD RECOVERY EXPERT's Avatar
    Join Date
    Sep 2005
    Location
    TEXAS... U mad?
    Posts
    6,158

    Black / Stryker Blue
    2K WS.6/ 2K9 G8GT

    5.5 is ok

  4. #4
    Senior Member
    Join Date
    Jul 2005
    Location
    Jacksonville, FL
    Posts
    2,723
    Owners manual says 5.5 w/filter change, some people put in 6.

  5. #5
    Ricekiller z28punk's Avatar
    Join Date
    Nov 2006
    Location
    Maple Grove, MN
    Age
    36
    Posts
    509

    Pewter
    2002 Camaro Z28

    GM says it takes 5.5 quarts, but mine takes 6.

  6. #6
    ArtistFormerlyKnownAsMac Silver Streak's Avatar
    Join Date
    Apr 2006
    Location
    Indianapolis, IN
    Posts
    4,886

    All Black
    83, 87, 02 All WS6 T/As

    Guy I know puts in 6 all the time.. but he races it a lot at the track..
    -Geno
    1983 Black WS6 "WindCharger"
    1987 Black WS6 "WS87"
    2002 Black WS6 "Silver Streak"
    Sold the other four f-bodies

  7. #7
    Member ultra_badass's Avatar
    Join Date
    Mar 2007
    Location
    Corpus Christi
    Posts
    257

    navy blue matallic
    2000 WS6 trans am M6

    i just put 6

  8. #8
    Ebaaaaaaaaa Speedy_Gonzales's Avatar
    Join Date
    Sep 2006
    Location
    Georgia
    Posts
    11,008

    Black
    2014 Camaro 1LS

    Quote Originally Posted by The_Wretched View Post
    just did my first oil change. went with mobil1 5w30 cuz the change oil light came on sooner than expected.

    now i thought 5 quarts is enough? but i heard from someone else that it should be 5.5?

    i checked the level again and it was fine... should i put in another .5 quart?
    if its full then dont put anymore in

  9. #9
    SS#430 1 of 74 7camaro7's Avatar
    Join Date
    Oct 2005
    Location
    Nashville, TN
    Posts
    1,753

    Pewter
    02SS6spd VERT!

    Quote Originally Posted by SpeedAddict38 View Post
    if its full then dont put anymore in
    you GA guys sure know how to make it simple hahaha, what's up man?

  10. #10
    Member qwk93ta's Avatar
    Join Date
    Oct 2006
    Location
    Fairfield, Ohio
    Age
    61
    Posts
    944

    Black
    00 WS6

    I put in 5.5

  11. #11
    Veteran Firebirdjones's Avatar
    Join Date
    May 2006
    Location
    Arizona
    Posts
    12,557
    Depends on the filter you use.
    On the LS1,,,,,
    I run the AC PF61 on the LS1,,,,and it's deeper than the stock filter the book calls for. Generally you can get another 1/4 quart to 1/2 quart or so. This number used to be PF62 but has been replaced with the new number I listed above. This filter will hang slightly below the oil pan about 1/2 inch. I'm experimenting with other brands,,,I may have found another that is even deeper yet for more oil capacity. But the filter the store will sell, or listed in the book is a very tiny stubby looking thing, compare it to the PF61 to see the difference.

    On the LT1,,,,
    Thank god these still take the good old large diameter filter the gen 1 small blocks take,,,,on these you can go with 3 different sizes.
    I use Fram on this car. You can use the Fram PH30 which is what the store tries to sell you,,,,it's only a 1/2 quart filter.
    Or,,,,you can jump up to the Fram PH5 which is a 1 quart filter. This filter used to be called a PH13 but the number has changed to a PH5.

    If you want alot of capacity, there is the PH373 which is a 2 quart filter. I have to warn you though,,,it's rather long and sometimes it doesn't clear all header applications. With this filter you can run as much as 7-7.5 quarts with a smallish 5 quart oil pan,,,,lol.

    I use this filter on my chevelle, with a 7 quart pan and 2 quart filter,,,it takes nearly a case to change it.
    Last edited by Firebirdjones; 02-21-2008 at 12:31 PM.

  12. #12
    Bone it like you own it FORD RECOVERY EXPERT's Avatar
    Join Date
    Sep 2005
    Location
    TEXAS... U mad?
    Posts
    6,158

    Black / Stryker Blue
    2K WS.6/ 2K9 G8GT

    a case??? dayum...

  13. #13
    Member
    Join Date
    Aug 2005
    Location
    Billings,MT
    Posts
    428

    Sunset Orange Metalic
    2002 Firehawk

    2 quart filter - WOW - 28 years in the automotive field - 17 years with GM and have not heard of a 2 quart GM passenger car oil filter.Learned something new every day

  14. #14
    Veteran Firebirdjones's Avatar
    Join Date
    May 2006
    Location
    Arizona
    Posts
    12,557
    Yep a 2 quart. Generally Autozone will have this in stock, maybe a few others that carry Fram,,,not sure on that though. I always find them at my local Autozone. Fram PH373,,,check it out,,,it's quite a sight, nearly,,if not more than a foot long. This fits GEN 1 and GEN 2 chevrolet small blocks,,,,big block chevys etc...I don't know of a 2 quart filter for any other application. It costs a bit more obviously, around $12 but you get a ton of filter area,,,you would have to try hard to clog that one,,,,lol.

    Ya the chevelle takes nearly a case, gets rather expensive. You should hear my father complain,,,,we just recently built a nice 455 pontiac for his GTO and stuck a 10 quart pan on that thing. Although the old pontiacs take a small 1/2 quart filter (Fram PH25, don't know of a bigger one for that application) he still sticks nearly a case of oil in his car. Our oil changes for these cars get dangerously close to $100

  15. #15
    Veteran Firebirdjones's Avatar
    Join Date
    May 2006
    Location
    Arizona
    Posts
    12,557
    Now that I think of it,,,I have a spare one in the shop. I use them on my truck too and I haven't gotten around to giving it it's spring time wakeup maintainance. I'll snap a picture of it tomorrow.

  16. #16
    Senior Member
    Join Date
    Apr 2007
    Location
    Newport, RI
    Posts
    1,552

    Navy Blue Metallic
    '00 Formy A4

    Quote Originally Posted by Firebirdjones View Post
    Depends on the filter you use.
    On the LS1,,,,,
    I run the AC PF61 on the LS1,,,,and it's deeper than the stock filter the book calls for. Generally you can get another 1/4 quart to 1/2 quart or so. This number used to be PF62 but has been replaced with the new number I listed above. This filter will hang slightly below the oil pan about 1/2 inch. I'm experimenting with other brands,,,I may have found another that is even deeper yet for more oil capacity. But the filter the store will sell, or listed in the book is a very tiny stubby looking thing, compare it to the PF61 to see the difference.
    Great info! I'm going to look into that next time I change the oil. It's pathetic how small the stock filter is, the first time I bought stuff for an oil change I had to double check to make sure I grabbed the right one. It looks like something off a tiny little four banger. I think the filter on my dad's Briggs and Stratton v-twin lawn tractor is bigger!

  17. #17
    Veteran Firebirdjones's Avatar
    Join Date
    May 2006
    Location
    Arizona
    Posts
    12,557
    Quote Originally Posted by StuntmanMike View Post
    Great info! I'm going to look into that next time I change the oil. It's pathetic how small the stock filter is, the first time I bought stuff for an oil change I had to double check to make sure I grabbed the right one. It looks like something off a tiny little four banger. I think the filter on my dad's Briggs and Stratton v-twin lawn tractor is bigger!
    LOL, you're right,,,,I also have Kohler V-twin tractor and the oil filter is twice the size,,,and I even run an oversize filter for that too, I beleive it's a Fram PH3975 or 85, I'd have to check it.

    The stock filter the book calls for on the LS1 is pathetic in my opinion. I found the AC PF61 to be longer,,,and I believe I have found a Fram that is bigger yet. Oh ya,,,I have to snap a picture of that PH373, I knew I forgot something today,,,lol.

  18. #18
    old timer blue02Z's Avatar
    Join Date
    Sep 2005
    Location
    Texas
    Age
    38
    Posts
    3,806

    Navy Blue Metallic
    2002 Z28

    i always put 6 in, i also use an oversized filter

  19. #19
    Senior Member INMY01TA's Avatar
    Join Date
    Jan 2006
    Location
    Marylandistan
    Posts
    5,761

    Black
    2001 Trans Am (sold)

    I use 5, including the filter. (longer Delco)

  20. #20
    Senior Member Too Fast's Avatar
    Join Date
    Nov 2006
    Location
    Indianapolis
    Age
    61
    Posts
    5,188

    Black
    2000 WS6 6spd Hooker LT

    5.5 for me. I thought the filter was too small too, but then again, this is not some 1960s "high performance" engine with massive dirt getting in, gas going downt the cylinder walls from running too rich or flooding during cold starts, etc. There are so many of these engines alive today (LS1) over 100k and still screaming down the 1/4 and getting over 25 MPG. If your dipstick says full, or over halfway between full and add, leave it alone.

Page 1 of 8 12345 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How many quarts of trans fluid for ws6?
    By Murder after Midnight in forum Almost Anything Goes
    Replies: 11
    Last Post: 03-01-2009, 05:41 AM
  2. How many quarts of tranny fluid?
    By patriot1136 in forum General Help
    Replies: 8
    Last Post: 06-10-2008, 08:30 AM
  3. How many oil quarts does an ls1 take?
    By wicked illusions in forum General Help
    Replies: 35
    Last Post: 04-10-2008, 06:48 PM
  4. How Many Quarts?
    By SStriker in forum Automatic Transmission
    Replies: 2
    Last Post: 08-16-2007, 07:26 PM
  5. Real quick! How many quarts for diff change?
    By ErikElvis in forum Drivetrain
    Replies: 2
    Last Post: 08-17-2006, 04:54 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •