will 11.5 m/t et streets fit

**346lsi** · 09-30-2009, 04:30 PM

any help would be appreciated i have a 98 camaro lowered 1.5 inches my question is would 26x11.5x16 m/t drag slicks fit or should i go to 10.5 inch slicks thanks mounted on factory 5 spoke wheels thanks

**Rk ws6** · 09-30-2009, 06:13 PM

people run in the 6's on a 10inch wide slick, i see no reason to go wider .... also id look into getting the 28 tall .... makes the wheel wells look very nice

**346lsi** · 09-30-2009, 06:33 PM

I had 28 inch tall tires when it sat at stock hieght but since I lowered it I think they would rub

**silverWS6** · 10-01-2009, 10:38 PM

They fit. I have the 11.5 m/t et streets and my car is also lowered and they go in with no problem... I think mine are 27x17x11.5 but im not sure ill check tomorrow morning

**346lsi** · 10-02-2009, 04:18 AM

Thanks I would appreciate it

**silverWS6** · 10-02-2009, 08:40 PM

They'll fir just fine

I just checked mine and they're 26x11.5x17 and i have em mounted on my WS.6 wheels and they dont rub at all and my car is lowered on the prokit

**Mr. Luos** · 10-02-2009, 08:48 PM

I am running 27x11.5x15 Hoosier QTP's. Tight fit, but they are in there.
Friend is running the same tire but 28x11.5x15...also tight, but still fitting.

I am lowered, he isn't.

**One_Bad_TA** · 10-18-2009, 07:07 PM

I am at stock ride height amd was wondering if I could run a 28" tall tire without any modification? I have a 9" with 4.56's and I need a 28" tall tire to save me from shifting to 5th in the quarter mile lol

**346lsi** · 10-19-2009, 06:37 AM

I had a 28 inch tall tire before I lowered it and it fit but every once in a while it would hit the right inner fender lip on hard launch I used a drag bag in the right rear coil spring to eliminate this ithink it was only 30$